Protective/Armor

- Impact-absorbing SmartFlex pads shield your hips from unexpected impacts - Silicone grippers on the back of each pad assure they stay in place - Ventilated pads - Pads are waterproof and will not absorb water or sweat

- Made for the e-xtreme - Hard shell gives protection and ability to slide on hard surfaces - Top and bottom adjustable hook and look fit-strap for customized comfort and security - Rugged Armortex (Kevlar blend material) pads covering flights abrasion - Zipper for easy on and off - Active Airflow: 4 layer ventilation system - Technical back mesh for breathability - CE 1621-1 certified to ensure outstanding protection

- Removable LITESHIELD PLUS back protector (EN 1621-2, level 2) - Protective EVA padding on the upper back and coccyx - Height-adjustable AIROFLEX hip belt with anti-stick Velcro - Odour prevention: treated with Polygiene Odor Crunch - Structured silicone coating on inner seams prevents slippage - Machine washable

The EVOC ENDURO SHIRT belongs to our protector clothing line. It is our protection shirt with optimum wearing comfort, which protects your shoulders and chest in case of a crash. The perfect complement to our PROTECTOR BACKPACKS. - CE-Certified shoulder protectors - Abrasion-resistant chest padding - Removable protectors allow machine wash - Weight: 320g

- Removable LITESHIELD PLUS back protector (EN 1621-2, level 2) - Protective EVA padding on the upper back and coccyx - Height-adjustable AIROFLEX hip belt with anti-stick Velcro - Odour prevention: treated with Polygiene Odor Crunch - Machine washable

You can't wear bulky, uncomfortable pads that hold you back. But when the elements turn against you, it could put you on the sideline, and you can't let that happen. With Pro-X3 Elbow Pads, you have the protection you need, when you need it. The rest of the time, you won't even know it's there. Go ride! - Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort, and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage

- A Kydex pierce-proof layer and a removable D3O LP1 pad provide certified impact protection. - Durable TPU skid plate for sliding during crashes along with a ripstop knee cover for abrasion resistance. - Stretch mesh rear panel with an integrated perforated elastic above the calf for a secured fit. - Ariaprene body fabric is highly breathable and a sustainable alternative to neoprene. - Foam padded side walls offer additional coverage. - Silicone gripper print inside top opening to prevent slippage. - Unisex size range.

The Carve models manage without hard shells and are therefore light and extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept provide high impact absorption and protection. With the Carve Evo+ iXS introduce product properties like exchangeable padding, structurally improved AeroMesh of newest generation offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - AeroMesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified - Adult-sized

Our super-light Youth Transition pads are designed for younger riders looking for lightweight protection that can be worn all day long. The Transition pads mold with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin. - High length compression design to prevent the pad from slipping - Silicone printed gripper on inside of cuffs - Mesh back for increased airflow - Certified CE EN 1621-1:2012 Level 2

Our super-light Youth Transition pads are designed for younger riders looking for lightweight protection that can be worn all day long. The Transition pads mould with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin.

Leatt's soft-shell 3DF impact foam knee pads just keep getting better and better. The Knee Guard 3DF 5.0 Junior has a totally new and refined sleeve construction with the latest material tech for riders who know that ventilation, fit and anti-slip are key and that great protection is a given. It features 3DF AirFit ventilated soft-impact foam, an abrasion-resistant Aramid outer layer for durability, and perforated materials for ventilation. CE tested and certified protection, it scores a total of 13 points in the Leatt protection rating system. - CE tested and certified as impact protection: Knee EN1621-1 - New 25% slimmer CE impact certified profile - New increased side protection - New wider, silicone-printed elastic cuffs - New 30mm low-profile elastic Velcro strap with easy-pull suede finger tabs - Anti-odor MoistureCool and AirMesh wicking fabrics - Pre-curved 3D design for better fit and function - Weight: 450g (pair)

The SURPASS from 100% is your ultimate choice for no compromise, all-in-one coverage. Featuring a Level 2 impact rating, this gear really does everything well—light enough for cross country, protective enough for downhill and breathable enough for all your pedaling needs. - Rubberized ventilated outer skin - Strategically placed perimeter embossed foam padding with ventilation - Fully ventilated plastic protective cup with high-impact absorption - Pre-curved chassis for attack position - Internal elastic flex joint maintains chassis compression during pedaling - Tacky silicone elastic webbing to prevent slippage - Thigh cinch for customizable fit and security - Calf cinch for added security - Impacted Tested with Maximum Level 2 Protection

Our only non-slip on design, the FORTIS features a protective shell for abrasion resistance and Level 1 impact protection to stand up to all your downhill riding needs. - Perforated neoprene chassis for breathability - Strategically placed perimeter embossed foam padding with ventilation - Tacky silicone elastic webbing to prevent slippage - Hook-and-loop closures with security cinch - Pre-curved chassis for attack position - Fortified injection-molded plastic shields - Spandex joint for ease of movement - Impacted Tested with Level 1 Protection - CE EN 1621-1:2012 Level 1

- Adjustable hook and loop strap closure around the calf and silicone gripper on the upper thigh provide a secure fit. - Removable D3O LP1 Compact certified impact absorbing foam. - Lycra front panel and mesh rear panel for comfort and breathability. - Abrasion-resistant knee cover for durability.

LIGHTWEIGHT HARDSHELL WITH IMPACT FOAM The 3.5 Body protector is a new product for 2022, it comes in 2 pieces, there is a zip up compression suit with built in shoulder and elbow impact protectors and also a height adjustable kidney belt. Then a hard-shell CE certified chest and back impact protector is used over the top. This modular system will not only give you the most protection but also great ventilation and comfort. This new concept is very easy to take on and off, which is a relief after a full day's riding and makes cleaning up super easy, works with or without a Leatt Neck Brace. Has a Leatt protection score of 17, if you are looking for something with even more protection including the flank take a look at the 6.5 body protector. - Total Leatt protection score of 17 points - Hard shell and 3DF AirFit ventilated soft impact foam - CE tested and certified as impact protection: - Chest prEN1621-3 Level 1 - Back EN1621-2 Level 1 - Elbow and Shoulder EN1621-1 - Our 3D design ensures a great fit that is comfortable and low profile - Separate Anti-odor modular central zip-up compression sock with built in elbow and shoulder protection designed for maximum airflow, evaporation and ultimate comfort - Kidney belt with height adjustability for best body fit - Meets FIM requirements - FFM-French Motorcycle Federation Certified - Removable front and rear plate function and BraceOnTM neck brace fitting system for over / under shirt Leatt neck brace fit - Unisex Fit: S-XXL 160-196cm 5ft3"-6ft 5"

The Carve models manage without hard shells and are, therefore, light and extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept, provide high impact absorption and protection. With the Carve Evo+, we introduce product properties like exchangeable padding and the newest generation of structurally improved AeroMesh, offering a higher level of comfort and structural strength. - Xmatter protection foam (exchangeable) - AeroMesh, light, moisture wicking, breathable, anti-bacterial, added structural strength, high level of comfort - LoopLock closings - Silicone gripper - Certifications: EN1621-1:2012, EN14362-1:2012, EN14362-3:2012, PFOS/PFOA (SGS Taiwan Ltd.) - Material composition: 40% Polyester, 25% PU, 15% Nylon, 15% Kevlar, 5% EVA

TERATEC Plus Protection is designed with the principle of right materials, right places. Designed specifically to offer great impact protection in a slim, form fitting chassis. Upgraded with additional, dense, lateral protection padding, these guards offer excellent SmartShock CE Level 1 impact protection and abrasion resistance. All while still offering maximum breathability and flexibility. - Impact tested and certified to CE EN 1621-1:2012 Level 1 - Sleek, comfortable slip-on sleeves - Lateral protection upgrades over the Teratec - Completely pre-curved chassis for attack position - Nylon, anti-abrasion, outer skin - Mobility flex joint for smooth articulation - Tacky silicone elastic webbing helps prevent slippage - Fully ventilated rear mesh for maximum cooling

- Open-back design for easy install and removal. - Featuring D3O T5 Evo X certified impact absorbing foam. - Perforated neoprene enhances venting and moisture control. - Foam padded side walls offer additional coverage. - Unisex size range

That voice in your head that’s telling you to back off and slow it down—yeah, you don’t need to listen to him. . iXS’s Mallet Knee/Shin Guards have you covered, literally. They are lightweight, loaded with high-tech features, and they fit securely to give you extra confidence. The AeroMesh material is lightweight and extremely breathable to help keep your legs cool and dry, even on hot summer days. And, it’s antimicrobial so it doesn’t absorb odor. Silicone strips inside deliver a no-slip fit and iXS’s LoopLock closures provide compression with maximum security. • ArmadilloDuo: dual-density padding made from flexible, shock absorbing thermoplastic • SqueezeBox: an articulating joint at the knee for a great fit with max comfort while pedaling • NockOut: vented 3D padding in critical areas including lower leg, upper leg, and inner/outer knees • KneeGusset: horseshoe-shaped gusset designed to keep pads in place during impact

Without compromising on safety and surpassing the relevant CE test the Transition pads offer comfortable protection in a super-light package. At 262g per side in Medium they are a true fit-and-forget piece of kit. - Low profile, minimal protection at its best - Compression fit kneepad with high-strength, flexible 1mm cap for superior fit and movement - Poly/Spandex and 4 way stretch mesh that is rollable and stowable enough to fit in a jersey pocket - Designed beyond CE EN 1621/1 Standards

Old School Neoprene guards are the most comfortable protective gear you will ever wear. Designed by Lizard Skins and manufactured in our Utah Facility. Made of 5mm perforated Airprene, 1/4 inch foam inserts, injected molded plastic inserts and a 2mm Powertex crash panel.

RIDECAMP is your simple, sleek and effective choice for cross-country and light-duty ride needs. - Lightweight slip-on sleeves - Pre-curved chassis for attack position - Lightly padded nylon anti-abrasion outer skin - Fully perforated neoprene chassis for breathability - Tacky silicone elastic webbing to prevent slippage - Fully ventilated rear mesh for maximum cooling - CE Directive 89/686/EEC MTB

- Adjustable hook and loop strap closure around the calf and silicone gripper on the upper thigh provide a secure fit. - Removable D3O LP1 foam pad provides certified impact protection. - Lycra front panel and mesh rear panel for comfort and breathability. - Abrasion-resistant knee cover for durability. - Silicone patch at shin combats slippage. - Unisex size range.

Ultra-slim and soft-impact gel protector. A high-tech elbow protection in a minimalistic, comfortable fit with CE certification, this elbow guard has a lightweight construction which can flex and fit for premium comfort. The AirFlex impact gel is the latest technology in protection. Single sizing and silicone grip panels give you the famous Leatt non-slip fit. - New super-slim and lightweight AirFlex gel impact protection - Our 3D design ensures a great fit that is very comfortable - Premium comfort using MoistureCool and AirMesh wicking fabrics - Silicone lamination, non-slip cuffs to keep protector in place - Silicone printed, cupped elbow grip - Total Leatt protection score of 11 points - CE tested and certified as impact protection: Elbow EN1621-1 - Weight: from 240g (0.53lbs) pair

- Body-mapped, impact-absorbing SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Ventilated SmartFlex hip pads allow airflow to keep wearer dry and comfortable - 4+ hour chamois to remain chafe-free (Not included on youth) - Moisture-wicking, UPF 50+ compression fabric - Side leg pocket - Women's short liner has high waist, yoga-style waistband, and longer inseam for a more comfortable fit - Machine washable - CE PPE II—15613 Impact Attenuation / 1621-1 coverage

The Troy Lee Designs Speed Elbow Sleeves use 4mm of D3O® to provide optimum protection during everyday trail riding. The breathable mesh material is comfortable enough for all-day rides. Pairs well with the Speed Knee Sleeve. SPECIFICATIONS - D3O® 4mm ultra-lightweight and flexible elbow pad - Full-length sleeve with silicone grippers prevents slipping - Breathable mesh panel for all-day riding comfort - Reflective logos - Sold in pairs-left/right - CE EN 13688:2013 Certified

- Body-mapped, impact-absorbing SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Ventilated SmartFlex hip pads allow airflow to keep wearer dry and comfortable - Moisture-wicking, UPF 50+ compression fabric - Side leg pocket - Machine washable - CE PPE II—15613 Impact Attenuation / 1621-1 coverage

The Flex elbow/youth knee pads are for any rider needing complete coverage with confidence-inspiring protection. Constructed in the same way our adult Flex Knee pads with an open back and dual-layer protection the Flex has you covered.

Ultra Slim and Soft Impact Gel Protector Minimalistic, comfortable, ergonomic fit, and uncompromised CE-certified impact protection. The Airflex Knee Guard Pro is an engineering masterpiece! The lightweight construction and silicone grip panels made it possible to delete the thigh strap and still keep that famous Leatt non-slip fit. This knee guard meets all of our design criteria. By changing over to 3D-shaped impact gel, we achieved the minimalistic slim shape while still keeping the CE Impact protection. - Super slim and lightweight AirFlex impact gel protection - Side and upper knee impact protection - Pre-curved design for optimal fit and function - Silicone-printed, cupped knee grip - Premium comfort using MoistureCool and AirMesh wicking fabrics - All protection materials perforated for ventilation - Silicone-printed, non-slip cuffs - Total Leatt protection score of 15 points - CE tested and certified as impact protection: Knee EN1621-1 - Weight: from 300g (0.66lbs) pair

All new for 2023 is the Leatt 4.5 neck brace, with 2-way thoracic adjustability for great fit, it sits between the 3.5 and 5.5 in the way of adjustment and price. A composite matrix platform offers not only strength but also a very lightweight neck brace you won’t know your wearing. Our neck braces are designed to transfer potential injury producing forces away from the neck during an impact, to other body parts in a safe and efficient manner, thereby reducing your risk of a neck injury. Feel protected and ride with confidence. If you are looking for more adjustability, take a look at the 5.5 -Independently lab and rider tested, proven to reduce neck forces and neck injuries through transferring the load during an accident away from the fragile bones in the neck. -Up to 89% reduction in critical cervical spine injuries -Collarbone injuries up to 45% MORE likely WITHOUT a neck brace -Independent Moto motorcycle study by Action Sports EMS -Engineered collarbone cut-out to keep your helmet rim away from your most fragile bones -Optimal helmet rim striking platform is designed to redistribute neck forces and provides the helmet with freedom of movement -CoreFlex split rear folding thoracic strut is designed to work with the body’s natural movements for a more comfortable fit and break away before applying excessive pressure to the back -Two-way adjustability for the rear to ensure a great fit -Composite matrix platform allows for efficient reduction in neck forces -Sculptured, split front for improved comfort and fit -Injected, durable and easy-to-clean foam padding -CE tested and certified as Personal Protective Equipment 89/686/EEC

Pedal-friendly, pro-level impact coverage. Designed for gravity-fueled riding with input from Dakine team riders, these mountain bike knee pads are designed to articulate while you pedal, so they stay in place as you ride. A skid plate and foam padding combo disperse impact loads, while the breathable build keeps the air flowing to keep you dry and comfortable. They are remarkably lightweight to boot.

The Slayer Elbow Pads set the standard for lightweight, breathable and CE-certified elbow pad design. Featuring dual-density DK Impact foam and a durable Cordura outer, these pads maintain a breathable design that's light and comfortable enough for longer rides and hot weather. Their pre-curved shape and flexible foam padding design maintain a custom-fit feel, while silicone gripper cuffs ensure a slip-free fit. Integrated odor control helps fight the stink factor. - Shell: Cordura Polyester, 4-way stretch AriaprenePro, 4-way stretch mesh back: 80% Polyester, 20% Nylon - Insert: 100% DK Impact Polyurethane foam - Lightweight, low-profile CE-certified elbow protector (EN 1621-1 Level 1) - Dual-density DK Impact energy-absorbing foam technology - Cordura abrasion resistance - Polygiene Odor Control technology - Open-back design increases breathability - Pre-curved ergonomic patterning for enhanced fit

Lightweight and breathable enough to forget you're wearing them, the Slayer Bike Elbow Sleeves offer low-profile padding for hot days and all-mountain rides. The form-fitting design uses energy-absorbing DK Impact foam for a flexible fit that conforms to match your arm. Snug-fitting four-way stretch mesh with gripper strips keep them in place, and built-in odor control helps manage the stink. - 4-way stretch mesh back: 70% Polyester 30% Nylon - Insert: 100% DK Impact Polyurethane foam - Our lightest, lowest-profile, most-breathable elbow pad - Perforated DK Impact energy-absorbing foam technology - Aramid ripstop shell - Polygiene Odor Control technology - Seamless calf band and silicone gripper elastic keep pad in place - Pre-curved ergonomic patterning for enhanced fit

The Agent knee pad 3D-molded foam insert hardens on impact for confident protection, bolstered by additional side padding for 360-degree knee protection. These pads stay put thanks to the adjustable thigh and calf straps enhanced with silicone gripper elastic. The Agents are built with a pre-curved ergonomic fit for total comfort plus an open back for cooling airflow, which we know you'll appreciate all the way up and down. - 3D shaped midweight CE certified knee protector - CE certified to EU 2016/425 (CRITT protocol VTT-007) - Perforated and breathable construction - DK Impact energy-absorbing foam technology - Polygiene Odor Control technology - Lateral and medial side protection - Interior patella support and back of calf compression for a secure fit - Adjustable thigh strap - Silicone gripper elastic

The new Agent biking Knee Pads feature impact-absorbing 3D-molded CE-certified foam in an easy-on/off design. This midweight pad opens all the way up, eliminating the need to take off your shoes, so you can easily put 'em on at the top without holding up the crew. - 3D shaped midweight CE certified knee protector - CE certified to EU 2016/425 (CRITT protocol VTT-007) - Easy on/off attachment straps (don't have to take off shoes) - Perforated and breathable construction - DK Impact energy-absorbing foam technology - Polygiene Odor Control technology - Lateral and medial side protection - Interior patella support and back-of-calf compression for a secure fit - Adjustable thigh & calf straps - Silicone gripper elastic

The Slayer Pro Knee Pads build on the design of the Slayer Pads. They're still lightweight and designed for riding the up and down but with the added benefit of strategic side padding and an adjustable elastic fit strap. The dual-density DK Impact foam and durable Cordura outer offer CE-certified protection. The pre-curved shape and flexible padding create a custom-fit feel, while full-stretch mesh back panels maintain all-day breathability. Integrated odor control helps fight the stink factor. - Shell: Cordura Polyester, 4-way stretch AriaprenePro, 4-way stretch mesh back: 75% Polyester 15% Nylon 5% EVA - Insert: 100% DK Impact Polyurethane foam - Low-profile CE certified knee protector with added side padding (EN 1621-1 Level 1) - Dual density DK Impact energy-absorbing foam technology - Adjustable elastic strap, seamless calf band and silicone gripper elastic lock pad in place - Cordura abrasion resistance - Polygiene Odor Control technology - Pre-curved ergonomic patterning for pedaling comfort

- Made for the e-xtreme - Hard shell gives protection and ability to slide on hard surfaces - Top and bottom adjustable hook and look fit-strap for customized comfort and security - Rugged Armortex (kevlar blend material) pads covering flights abrasion - Zipper for easy on and off - Active Airflow: 4 layer ventilation system - Technial back mesh for breathability - CE 1621-1 certified to ensure outstanding protection

The Invisa-Lite knee pads feature 3D foam, Lycra compression fit and anti-slip silicone. - Breathable, lightweight Lycra body - Double and single needle heavy-duty stitching - Protection Area: Knee - Pad Type: Foam

Freeride legend Darren “The Claw” Berrecloth demands the best when it comes to his equipment. iXS’s Dagger Knee Guards were developed with input from The Claw, so they have everything you need when you’re pushing the envelope. Specially designed for gravity applications, the Daggers are loaded with thoughtful, high-tech features for a perfect fit with next-level protection. The AeroMesh material is lightweight and extremely breathable to help keep your legs cool and dry, even on hot summer days. And, it’s antimicrobial so it doesn’t absorb odor. Silicone strips inside deliver a no-slip fit, and iXS’s LoopLock closures provide compression with maximum security. Key Technologies: - Armadillo Duo: Dual-compound hard shells provide skid and puncture protection while remaining flexible - SqueezeBox: Patented shell linkage allows for full articulation without sacrificing protection - Knee Gusset: Internal padding around the patella locks protector in position and distributes impact forces around the knee - AeroMesh: Lightweight and anti-bacterial treated 3D performance mesh, optimized for breathability and moisture wicking

TERATEC Protection is designed with the principle of right materials, in all the right places. Primarily designed for enduro/all mountain, these guards offer Level 1 impact protection while still offering maximum breathability and flexibility for everyday use. - Sleek slip-on sleeves - Pre-curved chassis for attack position - Moderately padded with nylon anti-abrasion outer skin - Tacky silicone elastic webbing to prevent slippage - Fully ventilated rear mesh for maximum cooling - Impacted Tested with Level 1 Protection

- Integrated lateral hip protectors (EN 1621-1, level 1) - Protective padding on the outer thighs and on the coccyx - Comfortable waistband - Flat seams prevent chafing - Odour prevention: treated with Polygiene Odor Crunch - Machine washable - Integrated CHAMOIS PAD

- Removable D3O T4 Trio foam pad provides impact protection. - Mesh sleeve fabric for breathability and comfort. - Silicone gripper plus hook and loop strap closure for a secure fit. - Abrasion-resistant elbow cover for durability. - Unisex size range

Flex Knee pads are for riders looking for soft pad comfort with the protection of a hard shell. Abrasion-resistant material covers the front and sides to give a full-on protection package. - Double layer custom foam for increased airflow and reduced weight - Upper calf muscle support to prevent pad from slipping - Center adjustment strap provides even tension above calf muscle and around top of pad - Custom idp polygon neoprene for superior protection and ventilation - Designed beyond CE EN 1621/1 Standards

Protector Shirt Zip

Easy to pull on. Easy to pedal in. Easy to forget you're wearing. The Slayer Bike Knee Sleeves offer low-profile padding for hot days and all-mountain riding. The form-fitting design uses energy-absorbing DK Impact foam for a flexible fit that conforms to match the shape of your leg. Snug-fitting, four-way stretch mesh with gripper strips keep them in place, and built-in odor control helps manage the stink. - 4-way stretch mesh back: 70% Polyester 30% Nylon - Insert: 100% DK Impact Polyurethane foam - Our lightest, lowest-profile, most-breathable knee pad - Perforated DK Impact energy absorbing foam technology - Aramid ripstop shell - Polygiene Odor Control technology - Seamless calf band and silicone gripper elastic keep pad in place - Pre-curved ergonomic patterning for enhanced fit

RIDECAMP is your simple, sleek and effective choice for cross-country and light-duty ride needs. - Lightweight slip-on sleeves - Pre-curved chassis for attack position - Lightly padded nylon anti-abrasion outer skin - Fully perforated neoprene chassis for breathability - Tacky silicone elastic webbing to prevent slippage - Fully ventilated rear mesh for maximum cooling

Everything that the adult Troy Lee Designs Speed Knee Sleeve has is incorporated into the youth version. The same D3O® reinforced knee pad provides comfortable protection. The silicone grippers and seamless construction prevent any slippage and still keep the pads comfortable. Learn more about D3O. - D3O® 4mm ultra-lightweight and flexible knee pad - Silicone grippers prevent slipping - 360° seamless construction for all day riding comfort - Reflective logos - Sold in pairs-left/right - CE EN 13688:2013

TERATEC Protection is designed with the principle of right materials, in all the right places. Primarily designed for enduro/all mountain, these guards offer Level 1 impact protection while still offering maximum breathability and flexibility for everyday use. - Sleek slip-on sleeves - Pre-curved chassis for attack position - Moderately padded with nylon anti-abrasion outer skin - Tacky silicone elastic webbing to prevent slippage - Fully ventilated rear mesh for maximum cooling - Impacted Tested with Level 1 Protection

The 3.0 EXT are extended hard-shell guards with 3DF impact foam that offers premium protection. The hard-shell design means there's no sock/sleeve; instead, a strap system allows for easy on/off and possible over-the-pant fit. It features a slimmer knee pad profile and an improved sliding surface, and offers a very nice fit with ergonomic left/right shapes. CE tested and certified protection that scores a total of 20 points in the Leatt protection rating system. - Hard-shell and 3DF AirFit ventilated soft impact foam - CE tested and certified as impact protection: Knee and shin EN1621-1 - Full shin extended length – EXT - New improved hard-shell sliding surface - 3D design for optimal fit with specific left and right sides - Slim shin plate that also fits inside boots - Weight: from 600g (1.32lbs) pair

Designed with valuable feedback from the legend himself, the new Sam Hill Lite signature knee pad is designed to be the ultimate ultra-lightweight knee pad for trail riding and the racer seeking super light protection. The Sam Hill Lite knee pads mould with body heat to provide maximum comfort with a breathable sleeve to wick moisture away from the skin. Unlike many minimalist pads, the Sam Hill Lites pass CE EN1621-1:2012. - Rollable and stash-able using the elastic loop - Durable knee cap fabric for increased durability and protection - Compression square line Ripstop spandex allows for a durable lightweight feel - Long thigh-length fit for no slippage and all-day comfort - Silicone top and bottom cuff elastic gripper - Silicone logo print to assist in gripping short liner cuff - Certified CE en1621-1:2012 level 1 - Weight 205G pair (size XL)

This hard-shell lower arm and soft, 3DF impact foam elbow combination provides both comfort and premium protection. It's a great product for all soft pad users who are looking for a sliding, more protected lower arm but who are still looking for that soft elbow pad feel. Now with an improved sliding surface, perforated and vented sleeves, as well as a silicone-coated X-strap for that solid fit with ergonomic left/right shapes. It's CE tested and certified protection that scores a total of 13 points in the Leatt protection rating system. - Soft elbow guard with hard-shell forearm sliders - CE tested and certified as impact protection: Elbow EN1621-1 - New anti-odor MoistureCool and AirMesh wicking fabrics - Abrasion-resistant Aramid outer layer for durability - Silicone printed elbow grip - 3D design ensures a great fit that is very comfortable - Weight: from 300g (0.66lbs) pair

Leatt listened to riders, and here it is—their zipper 3DF impact foam knee pads. Based on their award-winning 3DF 5.0 pad, they redesigned the chassis to incorporate a zipper that allows you to easily put on and remove the pads. They created a design incorporating a zipper that would never fail, but still allow you to bend your knee. It also features silicone-printed and adjustable non-slip leg straps, a pre-curved 3D design for better fit and function, and an abrasion-resistant Aramid outer layer for durability. CE tested for certified protection that scores a total of 13 points in the Leatt protection rating system. - CE tested and certified as impact protection: Knee EN1621-1 - Non-scratchy zip closure system for easy removal without taking shoes off - New slim, CE impact certified knee pad profile - New ventilated, perforated Neoprene sleeve - New anti-slip calf band and silicone grip lining - New anti-odor MoistureCool and AirMesh wicking fabrics - Weight: from 520g (1.15lbs) pair

Our only non-slip on design, the FORTIS features a protective shell for abrasion resistance and Level 1 impact protection to stand up to all your particularly downhill riding needs. - Perforated neoprene chassis for breathability - Strategically placed perimeter embossed foam padding with ventilation - Dense forward-facing chassis for shield protection - Internal elastic flex joint maintains chassis compression during pedaling - Tacky silicone elastic webbing to prevent slippage - Hook-and-loop thigh and calf closures with security cinch - Pre-curved chassis for attack position - Fortified injection molded plastic shields - Impacted Tested with Level 1 Protection - CE EN 1621-1:2012 Level 1

- Engineered collarbone cut-out to keep your helmet rim away from your most fragile bones - Composite matrix platform allows for the most efficient reduction in neck forces - Optimal helmet rim striking platform is designed to redistribute neck forces and provides the helmet with freedom of movement - CoreFlex split rear folding thoracic strut is designed to work with the body's natural movements for a more comfortable fit - Adjustable, Four-angle Thoracic strut engineered to break away before applying excessive pressure to the back - Sliding front and rear SureFit adjusters offer Three-way adjustability for that perfect fit - Sculptured, split front for improved comfort and fit - Low profile push-button open/closure system - Easy-to-use emergency release mechanism - Injected, durable and easy-to-clean foam padding - CE tested and certified as Personal Protective Equipment 89/686/EEC - Weight: from 790g (1.74lbs)

- Custom diecut removable D3O XTI Mesh foam pad provides impact protection. - Mesh sleeve fabric for breathability and comfort. - Silicone gripper plus hook and loop strap closure for a secure fit. - Abrasion-resistant elbow cover for durability.

More durability. More comfort. More customized fit. Pro-Rugged Knee-Shin Guards are made with SmartFlex—body-mapped, impact-absorbing pads that offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact. So bring on more trails with sharp branches and rocks. - Extra-wide top gripper distributes pressure and keeps pads in place - Armortex technology adds durability to pads and resists tearing or catching - Soft inner foam keeps pads secure and comfortable on knees - Body-mapped, impact-absorbing SmartFlex pads - Extended coverage for shins - Adjustable fit-strap for customized comfort - Ultra-comfortable double-knit compression fabric for extra protection - CE 1621-1 certified to ensure outstanding protection - Ventilated mesh back keeps the wearer cool and dry - Machine washable - Low-profile bottom gripper keeps pads in place

These body-mapped, impact-absorbing SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact. - Ventilated SmartFlex hip pads allow airflow to keep wearer dry and comfortable - 4+ hour chamois to remain chafe-free - Moisture-wicking, UPF 50+ compression fabric - Side leg pocket - Machine washable - CE PPE II—15613 Impact Attenuation / 1621-1 coverage

More durability. More comfort. More customized fit. Pro-Rugged Elbow Guards deliver more because you demand it. So bring on more trails with sharp branches and rocks. Pro-Rugged Elbow Guards are made with the same legendary, soft, ultra-conforming G-Form technology that hardens on impact. But now with much, much more. Featuring SmartFlex: Flexible As You Ride. Hardens on Impact. - Body-mapped impact-absorbing SmartFlex pads - Armortex technology adds durability to your pads and resists tearing or catching - Ultra-comfortable double-knit compression fabric for extra protection - Extra-wide top gripper distributes pressure and keeps pads in place - Ventilated mesh back keeps you cool and dry - Low-profile bottom gripper keeps pads in place - Soft inner foam keeps guards secure and comfortable on your elbows - Machine washable

A lightweight chest protector with premium hard-shell roost protection. CE tested and certified, the 3D design and adjustable waist straps offer a close fit that is comfortable as well as ventilated and works with or without a Leatt Neck Brace. Next step up in protection level is the 4.5 Chest Protector Junior with impact foam. - Total Leatt protection score of 3 points - Hard shell protector - CE tested and certified as roost protection: Chest EN14021 - Our 3D design ensures a great fit that is very comfortable - Padded base layer to prevent hard shell rubbing on skin - Close fitting allows for over or under the jersey use - Liberal venting helps keep rider cool - Recessed front/rear areas and BraceOn neck brace fitting system allow over/ under the shirt Leatt neck brace fit - Adjustable waist straps for great fit - Weight: 550g Junior fits two sizes: - Small/Medium = 134 – 146cm, 4ft 5" – 4ft 9" - Large/XX-Large = 147 – 159cm, 4ft 9" – 5ft 3"

Super Light Minimalist design keeps weight low and a slim profile means the Transition elbow pads can easily go unnoticed under a jersey. Internal silicone strips combined with a compression fit mean the pads form closely around the upper and forearm giving a consistent non-slip fit. Breathable The breathable 4-way stretch mesh runs the full length on the inside of the pads keeping free from moisture build-up. - High length compression design to prevent pad from slipping - Silicone printed gripper on inside of cuffs - Mesh back for increased airflow - Tested beyond CE EN 1621-1:2012 Level 2 - Pre-curved fit for ultimate comfort - S: S: 8''-10'' (20-25cm), M: 10''-12'' (25-30cm), L: 12''-14'' (30-35cm), XL: 14''-16'' (35-40cm) - Take measurement from the widest part of the bicep - Weight 245g (size L)