Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Fenders
$4.99
The Hardcore Fender Hardware Kits are compatible with select Hardcore fenders, Full Fenders, Hardcore Recumbent Fenders, and SpeedEZ fenders.
Includes:
- Rear fender plastic clip
- Fork and brake bridge-thru bolts
- Stay bolts and lock washers
Specific compatibility w/Planet Bike fenders:
- 35mm Width: 700c x 35mm Fenders (Hardcore)
- 45mm Width: 700c x 45mm (Hardcore, Full, and SpeedEZ); 700c Rear (Hardcore Recumbent)
- 60mm Width: 26-inch x 60mm (Full, SpeedEZ, and Hardcore)
$6.95
Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.
$6.99
- Releases front fender stays if debris is present in between fender and tire
- Fits current and past Grasshopper, Cascadia ALX, Cascadia and Hardcore front fenders (not recommended for non-Planet Bike fenders)
$9.99
The Cascadia Fender Hardware Kits are compatible with Cascadia fenders, Hardcore fenders, and Full fenders.
Includes:
- Rear fender plastic clip
- Fork and brake bridge-thru bolts
- Stay bolts and lock washers
- Disc adaptor spacers (60mm & 65mm widths only)
Specific compatibility w/Planet Bike Fenders:
- 35mm Width: 700c x 35mm Fenders (Cascadia & Hardcore)
- 45mm Width: 700c x 45mm Fenders (Cascadia, Hardcore, and Full)
- 60mm Width: 26-inch x 60mm Fenders (Cascadia & Hardcore)
- 65mm Width: 29-inch x 65mm (Cascadia)
$9.99
X-Long Mudflap/Spoiler can be retrofitted to any fender profile of the correct size. A hole may need to be drilled in the profile if one isn't already there.
- Adds 6 inches of coverage to any fender profile
- 35mm size fits fender profiles up to 35mm
- 53mm size fits fender profiles 46mm-55mm
$10.50
Features
- Compatible with common wheel and tire sizes
- Helps keep the back side of suspension fork bridges clean
- Multi-color Giant logo sticker pack included
$10.99
Addd an extra dose of stability to SKS's Velo 42 and Velo 47 fenders. A stainless steel U-stay mounts to the fenders and your frame eyelets to eliminate rattling and bouncing fenders.
$11.99
The S-Guard is not just for road bike cyclists; this super-lightweight (24g) and small mudguard protects your bottom from mud and water. Made with super-soft material, it fits on nearly every saddle with the addition of a cable tie.
$12.00 - $15.08
- Attaches to saddle rails
- Quick and easy to install and remove
- Fat Butt, a wider version for fatbike applications
- Road/CX narrower for road and cross bike applications
$12.99
Minimalist down tube mudguard
Say it, don’t spray it with our minimalist down tube mud guard. The Grunge Board is a great choice if you are looking for some extra protection from spray, mud, and crud. The downtube-mounted fender has a 3-inch profile and quickly secures to your bike with the two-point rubber strapping system.
$12.99
The Mudrocker Rear Extender can be snapped on and used for extra protection in the bottom bracket/derailleur area. This item is included with the Mudrocker Rear Fender, but we offer it here as a replacement.
- Made in Germany
$13.00
Easy to install and available in various colors and designs, the Splash Pad Front Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and compatible with suspension forks.
- A low-profile, easy-install fender that keeps riders clean in various conditions
- Fits wide range of wheel sizes
- Tool-free installation
- Zip ties not included. Color zip tie options available through Problem Solvers.
$13.19
Simple solution to keep the spray down when the weather turns nasty
- Attach to the fork crown and legs with zip ties
- Compatibility: universal
- Width: 120mm
- Color: black
- Weight: 20g
$13.99
Lightweight and stealthy, Muc-Off Ride Guards keeps mud fling to a minimum.
- Guards against mud
- Made from 100% recycled plastic waste
- 100% recyclable
- Supplied with 4 zip ties
- Made in England
$13.99
Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.
$14.59 - $15.99
Meet the brand new, fantastic, feature packed Face Fender!
Lightweight, discreet, and very effective, the Face Fender is a simple front mud guard for mountain bikes, made from 100% recycled plastic.
SHIZZLE SHIELD
- Integrated into the Face Fender is the Shizzle Shield, which, when folded toward the tyre, stops pretty much anything from being flung forward and hitting you in the mush.
NO MORE ZIP-TIES
- No more zip-ties! The fender is profiled to hold the Velcro fastener without needing zip-ties or anything else.
$14.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes.
- Material: Polypropylene
- Added Features: 3M reflective printing
- Size: 31.7cm / 12.5" (in length)
- Weight: 42g / 1.48oz
$14.99
Easy to install and available in various colors and designs, the MSW Splash Pad Rear Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and is compatible with standard saddle rail configurations.
- A low-profile, easy-install fender that keeps riders clean in various conditions
- Fits wide range of wheel sizes
- Tool-free installation
- Zip ties not included. Color zip tie options available through Problem Solvers.
$14.99
This super lightweight (45g) and discreet mudguard protects your face from mud and water. Made of super soft material it fits to 26", 27.5" and 29" bikes and is compatible with most forks. The Flapguard Mudguard sticks close to your bike even in extremely aggressive riding due to the supplied zip ties, which wrap around the fork bridge and fork legs. Mud is also kept off your fork seals. Also compatible on rear side of frame.
$15.00
These clip-on fenders are designed specifically for fat bikes. They're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure.
- Extra-long and wide to accommodate the biggest tires
- Easy to install and fits virtually any bicycle
- Works with both rigid and suspension forks
$15.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes.
- Material: Polypropylene
- Added Features: 3M reflective printing
- Size: 35cm / 13.8" (in length)
- Weight: 68g / 2.40oz
$15.99
- Raceblade Long Hardware Kit, for 2nd bike, or to replace worn parts
$15.99
The X-Board is an innovative clip-on fender with rubber fasteners for downtube mounting.
- Adjustable soft rubber cable-spacers, ideal to adapt on almost any tube profile
- Robust rubber fasteners
- Dual compound-softspoiler
$16.00 - $21.00
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation, so you can get to the trailhead sooner and shred with much less mess.
- Works on all RockShox fork models
- Comes with 4 zip ties for immediate installation
- Offered in a wide range of colors that match RockShox's fork decal packs
- Deep side skirts protect stanchions and dust seals from rocks and debris
$16.00 - $21.00
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess.
- Works on all RockShox fork models
- Comes with 4 zip ties for immediate installation
- Offered in a wide range of colors that match RockShox's fork decal packs
- Designed specifically for RockShox forks
- Deep side skirts protect stanchions and dust seals from rocks and debris
- Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed
$16.50
'Soggy Arse Syndrome' protection for your treasured derriere. Lightweight, discreet, and very effective, the Butt Fender, Black looks great while helping to keep your backside clean and comfortable.
CURVALICIOUS
Having extra curves, in the right areas, the new Butt Fender offers more protection for your peachy derriere while eliminating any possibility of it getting caught on your tyre, at full drop - the fender, not your butt.
FASTENERS? PFFT!
The profile of the Butt Fender is enough for you to attach it to your saddle without the need for additional fasteners.
EVERY LITTLE HELPS
And for those with clumsy fingers and thumbs, like us, there's now an additional tab to grab hold of when pulling the fender down onto the bottom rails.
ECO-SAVVY
We are always looking for ways to eliminate single-use plastic and waste from our products and packaging. And the Butt Fender is no exception. There isn't a piece of single-use plastic in sight. No fasteners. No packaging. Nowt!
Furthermore, each Butt Fender is proudly made just up t'road, using 100% recycled plastic. And when it can protect your butt no more, you'll be glad to know that it's also 100% recyclable.
- Weight: 30g
- Length: 350mm
- Width: 130mm
- Height: 1mm
$16.99
Original equipment replacement fender.
GENUINE REPLACEMENT PARTS
Get back on the road with an original replacement fender for your Ponto Go!.
PRODUCT DETAILS
- Mounting hardware not included
- Sold individually
- Plastic construction
$16.99
This super-lightweight (45g) and discreet mudguard protects your face (and your fork seals) from mud and water. Made of super-soft material, it fits 26", 27.5", and 29" bikes and is compatible with most forks. Thanks to the included zip ties that wrap around the fork bridge and fork legs, the Flapguard sticks close to your bike even during extremely aggressive riding.
- Also compatible on rear side of frame
$16.99
Say goodbye to flying mud!
The SPEEDROCKER Extension clip-on mudguard extension mainly protects riders behind you from dirt and wet conditions. The extension—made of black, impact-resistant plastic—can be easily clipped onto the tried and tested SPEEDROCKER rear mudguard, thus extending it by 170mm. It can be mounted and removed without any tools in just a few seconds. The splashing between the tire and mudguard at the lower end also allows it to better deflect any spraying water and mud. This not only protects the rider's back, but also their cycling companion from any flying dirt.
- Weight: 36g
- Length rear fender: 170mm
Page 1 of 6
Next page