Packs/Racks/Baskets

High visibility is so important to us at Ortlieb because it is a matter of safety. Both the waterproof, polyurethane-coated Cordura fabric in neon yellow and the black fabric parts of this bag are densely interwoven with high-luminosity reflective yarn. This composition turns the entire bag into an eminently visible reflector when it is picked up in the headlights of passing cars. The waterproof Sport-Packer is perfectly suitable as lowrider pannier in the front, "small" rear pannier or for children's bikes. The QL2.1 fixing offers quick and comfortable singlehanded mounting to the rack. - Classical pannier (pair) with roll closure in bright reflective color - QL2.1 mounting system for racks with max. 16 mm tube diameter - Reduction inserts for tube diameters 8, 10 or 12 mm with anti-scratch function preventing abrasion on the rack - 20 mm hook available as separate accessory (e.g. for E-bikes) - PVC-free reflective fabric - Increased visibility when hit by headlights due to highly visible reflective fabric in neon yellow and black - Can be used individually or as pairs for the rear or front rack (low-rider) - Including integrated inner pocket and shoulder strap - Ideal for use on children's/youth bicycles - Highly reflective 3M Scotchlite reflector - Can be easily cleaned inside

Made of durable polyester fabric and long known as an ideal pannier for extended tours in any kind of weather, the spacious Bike Packer Classic is now available with the QL2.1 rack mounting system. The advantage of this faithful companion at your rear wheel: greater transport comfort, stability and safety. - Panniers (pair) with classic lid closure for large packing volume - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 und 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Due to its symmetrical form it is possible to use only one bag on left or right side - The dust flap - with easily operable pull cord - under the lid provides protection e.g. against water, dust and snow - The edge protector prevents contact with spokes and abrasion - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective 3M Scotchlite reflector - Easy to clean inside

A full-featured, waterproof urban-inspired pannier that overcomes limitations normally found with waterproof bags. Offers exceptional external load flexibility, removeable internal organizers for digital devices, and a convenient external access pocket for keys and/or phone. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - HYDRACORE liner provides an exceptional IPX5 waterproof rating. - Rixen & Kaul VARIO 2 spring-loaded hooks immediately adjust from 6mm-16mm, without any need for tools. - Rixen & Kaul lower SLIDE-LOCK and FLIP-LOCK hold panniers firmly in place. - Intuitive waterproof roll-down closure system. - Waterproof outer pocket. - Removeable 14.2"x10.2" padded laptop/electronics sleeve/organizer. - Removeable 10"x8" padded tablet/electronics sleeve/organizer. - External zippered pocket for keys/wallet, etc... - Keychain clips + 2 x Axiom keychains. - Independent main compartment and outer compartment compression/cargo straps provide exceptional load control. - Outer straps allow gear to be carried outside of the main cavity. Ideal for unplanned loads faced by commuters. - Strap control loops to protect against strap damage if straps are not secured. - Dual daisy-chain tie-down strips for additional load attachment. - Ultra-visible three-way 3M triangle logos. - Ultra-stiff polypropylene backing plate. - Front and rear light clips. - Carry handle. - D-Rings built in to hook attachment points for additional luggage tie-down, or for attaching your own shoulder strap.

An evolution of the classic briefcase, the New Street is designed to go from the bike to the office and beyond. Compatible with KLICKfix modul rail rack attachment, it features a hidden luggage trolley sleeve, and removable shoulder strap. Made from durable, waterproof materials with reflective details and padded laptop sleeve. Volume: 15L. -Waterproof PU Coated Nylon 66 & Cordura -YKK Aquaguard Zips -Padded Compartments -Clever Interior Details -High Grade Aluminium Hardware -100% Recycled Lining -Reflective Details

Durable polyester fabric make this pannier a long lasting touring companion. The waterproof roll closure ensures safe and waterproof storage of food and equipment. With its QL2.1 fixing it is quickly mounted and taken off the bike rack. A shoulder strap provides carrying comfort when taken off the rack. - Classical rear pannier (pair) with roll closure - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picknick) - Can be combined with the ORTLIEB Rack-Pack size S or M - Highly reflective Scotchlite reflector - Easy to clean inside - Optional accessories: ORTLIEB carrying system, outer pockets (size S), mesh pocket, bottle cage, 20 mm QL2.1 hook, anti-theft device long - Note: In order to meet standard IP64 (6=dustproof, 4=protected against splash water coming from all directions) the closure must be rolled 3-4 times.

Dubbed 'Straggle-Check' frame bags, these bags are designed to fit both 700c and 650b Straggler and 700c Cross Check frames. Size up one size on your bag if you've got a 650b Straggler frame and voila, it fits. These are handmade by Revelate Designs in the U.S., made of Dimension Polyant VX 21 polyurethane coated fabric. It's durable, rip resistant, tightly woven and laminated to make it highly water resistant but not fully waterproof…. Revelate advises using stuff sacks inside (such as the one in which our bags are packaged) if you risk riding in extended downpours or underwater. Surly's Straggle-Check frame bags (as well as their mountain bags) are now using a ladder strap system, which allows greater flexibility in how you attach the bag to your frame. The ladder straps let you customize the fit and placement of the mounting straps so if you have some weird contraption clamped to your frame tubes like a chain keeper, cable pulley, or some trinket grandma gave you, it won't interfere with the mounting straps on the frame bag. They're also including foam bumpers for the mounting straps to minimize thread abrasion to the bag and attachment points Quality YKK brand water resistant zippers – with an improved, water resistant zipper 'garage' – control compartment access and help keep the weather out. Zippers are sewn with a stretch panel to relieve stress on the zipper as well. Stress even kills zippers. The large main compartment has a flexible divider inside, and there's a hydration port to make sure your whistle stays wet. There's also a compartment suitable for smaller items you'll access relatively often, like your map, phone, hard boiled eggs, uncontained pudding, marbles for playing marbles, your dugout, that ring you found that makes you disappear when you put it on, or whathaveyou. Frame bags such as this are light and reasonably voluminous. They are stable because they center weight low between your wheels and body, and they go places where racks and panniers are often troublesome, like singletrack. Note: due to the rough texture of the mounting straps, prolonged use may lead to scratched or worn paint. If you're worried about keeping everything looking pristine you probably ought to look for some other type of bag, or figure a way to protect the paint, such as duct tape, or tatting a top tube doily - for example.

Ideal for multiday tours and self-supported races, the ORTLIEB Gravel-Pack duo offers you a combined payload of 25 liters for additional gear such as mess kits, food, and other "luxury" items. Mounting the Pack to your lowrider bike rack allows you to maintain a low center of gravity and undiminished off-road agility despite your extra gear. While the Pack's streamlined design – without inside pockets and a shoulder-strap pad – helps to keep it in the featherweight class, its lightweight, wear-resistant material withstands even the harshest of rock and gravel conditions you encounter on your way. And, no matter how wet the weather, your things will stay dry thanks to the proven ORTLIEB-waterproof quality and roll closure. With the QL2.1 system and two mounting hooks, the Gravel-Pack remains tightly attached to your bike rack while you ride over hill and dale on your gravel grinder, mountain bike or fatbike.

Bring your best friend. Dog. Cat. Bunny. Iguana. Whatever. Don't leave home without them! Now your BFF can tag along on every ride to the farmers market, dog beach, or local pub. Bring your four-legged friend along for your two-wheeled ride. - Allows pets to enjoy the ride while protecting them from jumping out - Made of durable, non-toxic plastic - Wire dome made of steel and cushion for comfort - 33 lbs. capacity - Complete with an MIK system - For bikes without an MIK-compatible rack, the MIK Carrier Plate can be purchased separately - Compatible with select Electra bike models - Dimensions: 43 x 33 x 22cm

A brilliant idea for all-season, all-weather riders: the bike bags in the Ortlieb High Visibility Line make it easier for other people to see you while you're out there on the streets. This is because all High Visibility bags not only come with reflectors, but are themselves one big reflector. The waterproof bags are made with a polyurethane-coated Cordura fabric that is woven through with a high-luminosity reflective yarn in neon yellow and black. That gives Ortlieb High Visibility bags an added safety feature in twilight conditions and in the dark of night. The Back-Roller High Visibility is the ideal bike bag for those who prefer the convenience of the roll closure system. The durable, waterproof, dustproof, abrasion-resistant and high quality fabric ensures optimal protection for your gear. Equipped with the sophisticated QL2.1 system with self-closing hooks, the Back-Roller attaches to your bike in a flash. And simply use the easily detachable shoulder strap to carry your bike bag comfortably once you've arrived at your destination. - Classical rear pannier (single bag) with roll closure in bright reflective color - QL2.1 mounting system for racks with max. 16 mm tube diameter - Reduction inserts for tube diameters 8, 10 or 12 mm with anti-scratch function preventing abrasion on the rack - 20 mm hook available as separate accessory (e.g. for E-bikes) - PVC-free reflective fabric - Increased visibility when hit by headlights due to highly visible reflective fabric in neon yellow and black - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picnic) - As a pair can be combined with the Ortlieb Rack-Pack size 24L or 31L on the rack - Comfortable to carry with shoulder strap (can be taken off) - Highly reflective 3M Scotchlite reflector - Can be easily cleaned inside

Ortlieb's far traveled classic model made of robust polyester fabric is designed for lowriders in the front or for the rear rack and is also suitable for children's bikes. With its QL2.1 system, it is quickly mounted and taken off the bike rack. - Classical pannier (pair) with roll closure - Can be used individually or as pairs for the rear or lowrider - Sides of PS490 nylon material, front and back of PD620 - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10, and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Symmetrical shape allows use on right or left side - Can be combined on the rack with Ortlieb Rack-Pack size 24L or 31L - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective Scotchlite reflector - Ideal for use on children's/youth bicycles - Easy to clean inside

With a padded inside compartment for your laptop/tablet and a total volume of 23 liters, the Velocity High Visibility is spacious enough to carry everything you'll need at work, school or play. And what makes this daypack really special is the reflective yarn woven into the polyurethane-coated fabric. The yarn, which is evenly distributed across the whole daypack, is highly reflective as soon as it's struck by a motorist's headlights, thereby significantly increasing the likelihood that you'll be detected at night in street traffic. Even during the day, the fluorescent yellow is a colorful eye-catcher. The practical Velcro roll closure and the ergonomic carriage system make this daypack a favorite accessory for every day. You can also attach an additional rear light or helmet to the mount on the closure. FEATURES: - Polyurethane-coated fabric with reflective yarn for enhanced safety at night - Stable pack bottom with rear edge guards and quadrapod design - Detachable chest and waist strap - Removable inside sleeve with laptop compartment - Handle

Surly mountain frame bags are designed specifically to fit in the main triangle of your Surly frame. Their mountain bags are now using a ladder strap system, which allows greater flexibility in how you attach the bag to your frame. The ladder straps let you customize the fit and placement of the mounting straps so if you have some weird contraption clamped to your frame tubes like a chain keeper, cable pulley or some trinket grandma gave you, you know it won't interfere with the mounting straps on the frame bag. Handmade by Revelate Designs in the U.S., these things are made of Dimension Polyant VX 42, a synthetic sailcloth. This stuff is durable, rip resistant, and tightly woven and laminated to make it highly water resistant (but not fully waterproof… Revelate advises using drybags inside if you risk riding in extended downpours or underwater). Compartment access is controlled by quality YKK brand water resistant zippers. The large main compartment has a flexible divider inside, and there's a hidden pocket too. There's also a compartment suitable for smaller items you''ll access relatively often, like your map, phone, hard boiled eggs, uncontained pudding, marbles for playing marbles, your dugout, that ring you found that makes you disappear when you put it on, or whathaveyou. Frame bags such as this are becoming more and more popular. They're light, reasonably voluminous, stable because they center weight low between your wheels and body, and they go places where racks and panniers are often troublesome, like singletrack. Surly offers them in ten sizes for many of their off-road frames. Buy the bag that matches the size of your frame based on the handy sizing chart. Note: due to the rough texture of the mounting straps, prolonged use may lead to scratched or worn paint. Those worried about keeping their frame looking pristine should immediately look for some other type of bag, or figure a way to protect their paint, such as duct tape. Or tatting a top tube doily. For example.

- Double bicycle bag, water-repellent polyester - Reflective stripes - Elastic bottle bands inside - Main compartment with pull cord - MIK system carriers/carrier plates, incl. MIK Adapter plate (70171) - 32L

Whether it's bike-packing or riding local trails, Surly's Frame Bags make carrying extra stuff simple. They're light, large, keep the center of gravity low, and keep the width of your cycle the same — making them ideal for singletrack. These bags are made by Revelate Designs in the U.S., and are constructed of Polyant sailcloth, an extremely tough, abrasion resistant, and highly water-resistant fabric. They have two compartments, a large one for bulky items, and a smaller one for food, your phone, or a camera. This model is compatible with Pugsley and Moonlander frames and fastens inside the main triangle with Velcro straps.

When race day arrives, the last thing you want to worry about is organization. The Zipp Transition 1 Gear Bag has multiple compartments to keep your essentials easy to find and converts quickly from backpack to duffel with a removable shoulder strap. A top molded pocket protects valuable items like cell phones and sunglasses, while a large ventilated lower compartment keeps shoes or wet clothes separated from the main hold. Camera bag-style dividers, an adjustable helmet pocket, and water-resistant fabric further extend the Transition 1's versatility, providing race-day relief from basic, cluttered alternatives. - Center compartment includes camera bag-style dividers to keep items organized. - Large ventilated lower compartment for shoes or wet clothing. - Adjustable helmet pocket. - EVA top pocket. - Side net for water bottles. - Reflective tabs. - Total volume of 56 liters

The Expedition Saddle Pack is lightweight, waterproof, and provides a spacious compartment under the saddle, eliminating the need for a rear rack. It’s designed to hold clothes and equipment on long distance rides. Built from a lightweight laminate developed specifically for Apidura, the Pack is highly resistant to abrasions and tears. The seams have been welded together, creating a waterproof seal that ensures contents always stay dry, even in sustained rain. A three-point attachment system with Hypalon-reinforced Velcro straps allows the Pack to hug the seat post, increasing stability and cutting down on lateral movement. Additional Hypalon on the Pack’s body keeps frames in good condition. The roll-down compression and closure system means the Pack’s volume can be tailored precisely to fit a range of packing needs. Materials The Expedition Saddle Pack is cut from a three-layer laminate fabric that was developed specifically for us. The material is lightweight, and is highly resistant to tears and abrasion. Notably, it’s welded together at the seams, creating a watertight seal that ensures complete waterproofing. The Pack’s attachment points are reinforced with Hypalon, a rubberized nylon used to provide extra protection against friction and abrasion. For the straps, Woojin buckles have been chosen for their strength and reliability. Finally, a lightweight moulded section of HDPE thermoplastic sits in the Pack’s lower section to reinforce its structure.

E-Mate has been designed by ORTLIEB especially for E-Bikes: a waterproof rear pannier with the proven QL2.1 mounting system. With 16 liters volume it takes anything for a comfortable day trip or a city tour by E-bike, offering room for a spare battery and the E-Bike display. The bright colored interior allows easy packing; the main feature: a padded and removable sleeve holds a battery (compatible with Bosch, Shimano, Yamaha, Bionix). The E-Bike display can be nicely stowed inside a zippered lid pocket. An outer mesh pocket helps keep things organized and allows quick access to the contents. The new magnetic closure allows quick access to the bag. Thanks to interior stiffeners the bag is stable and will stand alone, helpful when packing. The padded shoulder strap ensures comfortable transport of the pannier. Grey reflectors ensure safety from dusk to dawn. E-Mate is sustainably produced in Germany and made of PVC-free nylon fabric. The ORTLIEB QL2.1 system allows fast and easy single-handed mounting and removal of the panniers to almost any carrier. The system is adjustable without requiring any tool, and is suitable for racks with a tube diameters up to 16mm (hook inserts for diameters of 8, 10 and 12mm are included) The hook rail on the lower rear side of the pannier serves for additional fixation; it is made of a two-component synthetic combination with anti-scratch function. This reduces abrasions on the carrier and prevents damage to the rack tubing. Thanks to the QL2.1 mounting hook rotatable in 45° steps the system is compatible with almost any bike rack. A 20 mm hook is available as optional accessory (article code E193) for carriers with larger diameter. OPTIONAL ACCESSORIES - QL-anti theft device (long), 20 mm Quick-Lock2.1 hook, bottle cage, outer pocket (each sold separately)

Bikepacking is also about embracing minimalism. You head off on your bike into the great outdoors, away from it all for an extended period. The amount of gear you can take is limited! The ORTLIEB Frame-Pack allows you to exploit your bike frame to create valuable stowage. Thanks to its lower center of gravity below your top tube, the Frame-Pack makes for an ideal stowage location for heavy gear such as tools, camping stoves, and food supplies. The proven, waterproof nylon fabric and the waterproof zipper ensure that your things remain absolutely dry even in the most inclement weather. Mounting the Frame-Pack with the ultra-strong Velcro straps to the top tube, seat tube, and down tube is a snap. The Frame-Pack is available in a 4-liter size and a 6-liter size – depending on the size of your bike frame.

The ORTLIEB Toptube Frame-Pack is the smart solution for all who want to use their frame's main triangle for storage space without having to do without their water bottle. The solution also works for those who have full-suspension mountain bikes with limited triangle space. With its 4-liter payload, the Toptube Frame-Pack provides plenty of space for heavy equipment such as tent poles, tools, and food supplies, while also helping to secure a low center for improved rising performance. And given that the bag and its zipper are waterproof, you can even cross rivers on your bikepacking tour without worrying about your stuff getting wet. The Frame-Pack attaches easily to your top tube and seat tube with the help of sturdy and highly adhesive Velcro straps. FURTHER FEATURES: - Ideal for all bikes with limited triangle space - Reflecting logo ADVICE: Suitable for carbon fiber frame.

The waterproof ORTLIEB Handlebar-Pack is an indispensable item when you’re on a bikepacking tour in the great outdoors. This Handlebar-Pack offers a payload of either 15 liters for your sleeping bag and pad. It also helps to secure a balanced distribution of gear and weight across your bike. Thanks to the roll closures at both ends, you can always gain quick access to your gear. Compression belts on the outside enable the stowing and attachment of additional equipment. Moreover, the Handlebar-Pack comes with four hooks to enable the attachment of an ORTLIEB Accessory-Pack for additional storage space. Consisting of spacers and two strong Velcro straps, the mounting system ensures secure attachment to any handlebar type, including carbon handlebars. The pack’s stiffened interior and head-tube attachment offer additional stability – in any terrain. FURTHER FEATURES: - Hooks for attaching an ORTLIEB Accessory-Pack - Also suitable for carbon handlebars - Mounting straps with convenient Velcro closures - Lightweight design - High luminosity 3M Scotchlite reflectors

Get ready for your next bikepacking adventure! As a key item in your bikepacking setup, the ORTLIEB Seat-Pack comes with Velcro straps to enable convenient and secure mounting to your seat stem. Projecting backwards from the seat stem, your Seat-Pack also serves as a rear fender. The spacious, waterproof Seat-Pack keeps its contents (e.g. an extra set of clothes) safe and dry. Depending on how long you plan to be away and your Seat-Pack model, you can conveniently adjust the volume of your pack from 7 to 11 liters by adjusting the roll closures on the sides. An additional valve allows you to quickly and easily compress your soft gear for a more compact fit. Your Seat-Pack also serves as a replacement backpack when you're out on a day trip, no matter whether you ride a hybrid bike, a mountain bike, a road bike, or an electric mountain bike. The Seat-Pack is available in two sizes. This model needs only six centimeters of space on your seat stem. That's why the more compact model is ideal for smaller frame sizes, full-suspension bikes, and adjustable seat stems. FURTHER FEATURES: - Reinforced fabric at all points of contact to the seat - Vertical daisy chain for rear light - Also suitable for carbon seat stems - Lightweight design - Four 3M Scotchlite reflectors available for full extension

The Racing Saddle Pack is the first rear pack dedicated to ultra-distance competition and audax. Featuring a sleek design with a compact capacity, the Pack is ideal for storing light, compressible items over vast distances. Constructed from an ultralight, waterproof laminate developed for Apidura. The Pack weighs less than 210g and securely fastens with a sturdy three-point attachment system. It’s designed to fit ergonomically under the saddle, minimizing sway and reducing drag. Light attachment points are laser-cut into the fabric, increasing rider safety without adding unnecessary weight. A high-contrast reflective feature is specially designed to enhance visibility in all light conditions. A roll-top closure provides adjustable capacity, and tailored webbing, straps and buckles shed extra weight, while ensuring the simplest setup for ease of use, when every second matters. Materials The Racing Saddle Pack is made from Hexalon, a bespoke laminated fabric developed specifically for Apidura. Designed to fit the demands of ultra-distance competition and audax, the material is waterproof and lightweight, with strong tear and abrasion resistance. The attachment points are reinforced with Hypalon, a durable rubberized nylon that provides extra protection against friction and puncture. For the fastening system, we’ve chosen Woojin buckles for strength and reliability.

This carbon Mukluk specific frame bag incorporates the best features of our classic Ranger frame bag. This frame bag is for the 2017-2021 year models of the Salsa carbon Mukluk. Your frame size correlates to the frame bag size; a small fits a small carbon Mukluk. If you have an aluminum Mukluk, we recommend the Ranger. Features: - Revelate exclusive RevX-PAC panels that are 2 times as abrasion resistant as standard VX material. - Zipstretch construction pairs a bomber, wetsuit style molded-tooth zipper with our exclusive stretch Cordura panels that reduce zipper stress when closing bag. - Industry leading #10 Molded tooth zippers with urethane coated tape are basically impervious to dirt and grit that destroy more commonly used water resistant coil zippers. - Exit port in main compartment for hydration tube or wires. - Zippered left side pocket on sizes SM-XL. - Bags feature one main compartment with vertical divider. - Expanding taper front section for increased volume at head tube. - Stretch mesh internal pocket. - Front top tube attachments accommodate top tube packs. Weight: - SM: 11 oz - MD: 12 oz - LG: 13 oz - XL: 15 oz Materials: - RevX-Pac Fabric: Dimension Polyant VX-21 with proprietary abrasion resistant finish; 1050 denier domestic ballistics nylon; 420 denier diamond ripstop lining; closed cell foam padded tube sections. Made in the USA with domestic and imported materials. These frame bags are manufactured and distributed by Revelate Designs and have no affiliation with Salsa Cycles. Salsa Cycles is a trademark of Quality Bicycle Products.

Made for Gravel & Bikepacking and Adventure Cycling, the Scape Seatpost Bag is a saddle pack designed as a holster attached to the saddle and seatpost made to hold its own waterproof dry sack. Made for gravel and adventure cycling, the Scape Seat Bag is a bikepacking bag made from two separate elements: a holster and a 100% waterproof (IPX4 certified) removable drybag. The holster is built from rugged materials to last, the holster bottom designed to act as a mudguard and protect the internal bag from any rear wheel contact. The dry bag easily compresses thanks to its air valve release mechanism to minimise bulk, and can be rolled smaller when less carrying space is needed. The daisy chain allows attachment of modular bags, and a loop is included to attach a rear light. Made from waterproof material to be prepared for any ride, regardless of conditions. HOLSTER - Lateral reflective logo - Plastic buckles with cam lock - Aluminium hook to fix the dry bag into the holster - Vertical daisy chain for extra bags attachment - Reinforced fabric at all points of contact to the seat and wheel - Dryhole to drain any water drops or condensation - Nylon webbing - Loop for mounting a rear light DRY BAG - 420D Nylon fully welded - Waterproof - Roll closure - Air pressure valve to minimize the space

ORTLIEB's frame bag with roll closure helps you start off your bike packing adventure well-prepared. Thanks to the waterproof roll closure —which is closed by three silicone rings— paired with the proven nylon fabric, your luggage inside the bag stays absolutely dry even in the most adverse conditions. The Frame-Pack RC is ideal for storing heavy luggage, such as tools or food, centrally on the bike. This maintains a low center of gravity so that the trail fun remains high even when fully loaded. The roll closure and its large opening allow easy access and easy packing of the bag. The assembly within the frame triangle is done with strong and robust Velcro fasteners. The specific positioning of the Velcro straps along the circumference of the bag enables individual adjustment to the dimensions of your bike. The Frame Pack RC is available in two sizes —4 and 6 liters — and suitable for mounting on carbon frames. The bag is PVC-free and sustainably made in Germany. FEATURES: - Reflective logo on both sides of the bag

The Frame-Pack RC Toptube is the solution for everyone who likes to have access to their water bottles while also carrying gear inside the bike frame triangle. This waterproof frame bag with roll closure is also ideal for full suspension mountain bikes, where space inside the frame's triangle is limited by the shocks. Part of ORTLIEB's bikepacking series, this bag with roll closure meets the IP64 standard for waterproofness, meaning your gear is fully protected from an involuntary bath. With its 4 liter volume, the Frame-Pack RC Toptube enables heavy equipment such as tent poles, tools or food to be carried within the frame triangle, maintaining the bike's low center of gravity. The customizable, sturdy, and strong Velcro fasteners enable simple and easy fastening and an uncomplicated installation. The frame pack RC Toptube is made in Germany and PVC-free. Together with the other products from the ORTLIEB bikepacking series, the frame pack RC Toptube forms the ideal equipment for an overnighter, a self-supported race, or your next big adventure. FEATURES: - Reflective logo on both sides of the bag

Do you like to take your bike shopping so as to avoid traffic jams and desperate searches for parking spots? And to get some good exercise and burn calories that you won’t have to count when you return for dinner? No matter whether you need to take a quick trip to the supermarket in the evening or to the farmer’s market on Saturday, your Velo-Shopper has a big hatch and an 18-liter payload. That’s enough for a lot of stuff! And you can conveniently open and close the magnetic snap buckle with one hand. Made of waterproof, abrasion-resistant nylon fabric, the Shopper can be attached to your bike rack with the proven Quick-Lock2.1 system. And then simply sling the Velo-Shopper over your shoulder with the detachable strap when you reach your destination. Go ahead and fill the Shopper to the brim because its stiff inside construction will help to prevent crushing. Further Features: - Zippered inside pocket with penholder and carabiner for keys - Secure attachment to virtually all bike racks with tube diameters of 8 mm to 16 mm - Large, high-luminosity 3M Scotchlite reflectors on the sides - Sturdy base for anti-tilt stability

Lightweight, waterproof pack is great for toting electronics and biking gear. Removable laptop compartment has a sleeve for your tablet. A mesh pouch for your helmet attaches to the front, and a crushproof compartment lets you store sunglasses. - Waterproof main compartment with roll top closure keeps content dry. - Hideaway helmet attachment system securely holds your helmet when not in use. - Hideaway high visibility rain cover with reflective screen print for increased bag protection. - Heat-molded, crush-proof SafeZone compartment protects sunglasses, smartphone or other fragile gear. - Padded, removable 15" laptop compartment with tablet sleeve sits on top of the bag rather than against your back for greater comfort. - 360 degree reflective elements increase visibility from all angles. - Organization compartment with U-lock stash pocket keeps items secure. - Airflow channels on EVA back panel and breathable shoulder straps provide maximum comfort and ventilation. - Blinky light attachment points on back panel and rain cover remove the need for fixed mounts on the bike. - High-visibility interior lining allows you to easily locate small items Technical specifications - Height: 13.4 in - Length: 18.9 in - Depth: 6.7 in - Weight: 2.56 lb - Capacity: 1465 cu in - Material: Cordura-like nylon 500D - Waterproof: IPX4

This expedition-worthy rack is made from 4130 chromoly, so it's tough, light and easily repairable in the field. It's also height-adjustable, so you can get your center of gravity as low as possible for a stable ride. The provided stainless steel hardware enables you to attach your rack to virtually any frame with 26-inch, 700c and 29-inch wheels. And, it hauls up to 80 pounds of gear and is powder-coated to protect it from the elements.

Built for hardcore adventure cycling, the Scape Handlebar Roll is a bikepacking bag made to securely hold its own adjustable, superior waterproof (IPX4 certified) dry sack featuring two compartments. Built for adventure, the Scape Handlebar Roll is a bikepacking bag made from two separate elements: a holster and a 100% waterproof (IPX4 certified) removable drybag featuring two internal compartments made from lightweight, waterproof materials and all-round weatherproof details. Specially designed for long-distance touring and bikepacking races and easily attaching to both drop (road and gravel type) and straight (MTB) handlebars, the holster attaches via two straps with aluminium buckles to make mounting quick and reliable, with EVA spacers to allow easy passage of cables and a fuller grip. A double daisy chain runs through the holster to hold bulkier items.