Filter By:
- Bar Ends (16)
- BMX (38)
- Bottom Brackets (242)
- Brakes/Levers/Pads (751)
- Cables (210)
- Cassettes/Freewheels (198)
- Chainrings (283)
- Chains (147)
- Show More Categories
- Cranksets (291)
- Derailleurs (169)
- Forks (176)
- Groups (22)
- Handlebar Grips/Tape (322)
- Handlebars (303)
- Headsets (178)
- Pedals (372)
- Saddles (382)
- Seatposts (105)
- Shift/Brake Combinations (75)
- Shifters (125)
- Shocks (41)
- Stems (143)
- Other (2040)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
Well, what´s to say about our DIVINE SL? It is simply the lightest production dropper post in the world with a total length of 445mm and 125mm infinite drop.
Tailored to the needs of XC and marathon racers, the DIVINE SL is the youngest offspring of our dropper family. Based on the award-winning and patented REVIVE technology, we´ve modified the internals to work perfectly with the shorter travel.
- Infinite adjust, 125mm travel
- Total overall length: 445mm
- But can be easily cut to as short as 375mm
- Titanium saddle bolts
- Tapered lower tube
- Compatible with oval and carbon saddle rails
- Sub-zero temperature functionality
- Fully user serviceable
- 450g
Sold as seatpost only—Remote/Trigger's are sold separately.
Single aluminium clamp design with covered/hidden bolt
- Dual-compound with soft grip area and harder endcaps for impact and scratch protection
- Non-centric, offset-design. The grips are indeed round, but the rubber is thicker on the rear side, so we have around double the rubber thickness on the palm side
- Cut-out inner sleeve for extra rubber thickness on the palm outside for even more extra padding and damping
- Relief pattern on the outside palm area (rider facing) and on the fingertips area (front side) for feeling and grip
- Weight: 113g /pr
- Length: 140mm
- Diameter (rubber part): 31mm
- For handlebar diameter: 22.2mm
Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post.
Compatible with: REVIVE / REVIVE 2.0
Service kit for 100 hr service (re-adjusting play and replacing wiper).
There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version.
To determine the correct service kit for your post, please copy this link into your web browser:
https://www.bikeyoke.de/media/products/REVIVE%20service%20kit%20coding.pdf
Kit includes:
- 1x Wiper (with spring)
- 6x Glide pin
- 1x Lower bushing (grey, with line marking)
- 1x Foam ring
- 1x C-clip R12
Kit includes:
- x2, Bolts (M5) with conical washers (T25 head)
- x2, Barrel nuts
Compatible with:
- REVIVE / REVIVE 2.0
- REVIVE MAX
- DIVINE
- DIVINE SL
- DIVINE SL RASCAL
BikeYoke Sanguine is designed specifically for the use in BikeYoke seat posts.
The formula reduces friction, ensuring fast action with minimal drag even in low winter temperatures below 0°C. Special additives help keep your post's o-rings and seals smooth and reduce wear.
- Suitable for all BikeYoke dropper posts
- Size: 250ml (lasts for several full services)
This BikeYoke allows the use of a standard shock in your Specialized bike.
Camber 2016-2018
Includes:
- 1x BikeYoke CB01
- 1x DU bushing
- 1x reducer
- 1x stainless steel bolt
This BikeYoke allows the use of a standard shock in your Specialized bike.
Epic 2018-2020
Includes:
- 1x BikeYoke EP02
- 1x DU bushing
- 1x reducer
- 1x stainless steel bolt
Electrify your ride with the Burgh Lightning Bar Tape.
Whether you’re facing a tough climb, getting pelted by rain or fanging for a fed, it’s a little reminder that you can find light in the darkest of times.
Tape Weight: Combined Weight 65g / Single Roll 32.5g
Dimensions: 200cm (L) x 3cm (W), 2.5mm thickness, tapering to 1.8mm at edges
Base Tape: Black
Print: Black/Gloss
Includes: 2x End Plugs, 2x Finishing Tape Strips
Comfort was at the forefront of our mind when we started developing The Cloud MK2 Seat. We wanted a saddle that offered comfort and resilient support for week long Enduro events.
- Dimensions: 132mm x 275mm
- CR-MO rails, moulded plastic base
- Weight: 270g
Designed to simplify thousands of hangers into one universal design that can be easily stocked by your local bike shop. Our hanger is uniquely forged and fully machined from aluminium giving you the toughest hanger possible. We always recommend having a spare to be sure of no missed rides.
- Compatible with all frames designed to accept the SRAM UDH
- Compatible with all MTB and E-MTB drivetrains
- Forged and Fully Machined from 7075 Aluminium
- Supplied with Mounting Screw and Washer
- Thru Axle Pitch M12 x 1.0
Manufacturer’s part number: AC-DRHG-MTB-A4
These super tough axles are constructed to Fox's exact specifications and made from 7075 Aluminium.
Unlike any other fork axles on the market, these feature a unique double hex design. This includes the traditional 6mm that everyone is familiar with but with an added 8mm Allen key fitting as well. This feature makes removal much easier if the 6mm gets chewed up, over tightened or not removed for a long time.
Having an Allen key fitting instead of a QR also allows the use of a torque wrench so you can be sure your wheel is correctly tightened. This Axle also comes with a grade 5 titanium pinch bolt and backing nut to finish things off.
Clean, simple, and fast!
Replacement for Fox PN:
820-09-071-KIT / Service Set: 2021 36-38 15x110 KaboltX Pinch-axle Assembly
820-09-063-KIT / Service Set: 2020 FOX-Marzocchi 15x110 QR Adjust Axle Assembly
NOTE: This axle does not fit 2021+ 32 and 34. (Square Arch)
Get Wild with Extra Stiffness and More Clearance
These super tough axles are constructed to Rockshox's exact specifications and made from 7075 Aluminium.
Unlike any other fork axles on the market, these feature a 6mm allen key fitting on both ends of the axle. This "Get out of Jail" feature might be pretty handy if you manage to chew one end up rushing to put your wheel on when your mates have already set off. We've all been there....
Having an Allen key fitting instead of a QR also allows the use of a torque wrench so you can be sure your wheel isn't falling off.
Benefit from the increased clearance without a lever in the way getting wacked by trailside debris!
The Burgtec composite pedal is everything you'd expect from a Burgtec pedal but at a more affordable price point.
Uncompromised grip, rugged durability, the exact same sculpted simple lines, fully backed up with spares and at an affordable price.
The best of both worlds can exist.
- Nylon and Fibreglass Body
- SCM415 Cromo Axle
- All replaceable steel pins
- 16mm Profile, 1mm Dish
- 96mm x 102mm Platform
- Weight: 376g
Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here!
After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date.
We did this by not only increasing the size of the pedal platform but also how concave it is. Furthermore, we reduced the diameter of the pins and added the most wear-resistant internals on the market.
From the outside to the inside, we've sweated the details of the MK5 to bring you the ultimate flat pedal.
- Weight: 379g
- Platform material: 7075 Alloy
- Profile: 15mm
- Platform: 100mm x 102mm
- Dish: 2mm (concave)
- Pin material: Stainless steel
- Pin width: 3.5mm
- Pin height: 4.5mm
- Axle Material: EN24T Steel
- Internals: 2 x Igus W300 bushings, single sealed bearing and inboard rubber oil seal
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. Dropout Bolt is also provided.
Constructed from 7075 Aluminium and made to the manufacturer's exact specifications.
Fits the following Santa Cruz bikes:
- 5010 V1, V2, V3
- Bronson V1, V2, V3
- Nomad V2.1, V3, V4
- Chameleon V5, V6, V7
- Heckler V7
- Heckler E-Bike V8
- Heckler MX E-Bike
- Bantam V1
- Blur TR V1.1
- Blur XC V2.2
- Blur LT V2.2, V2.1c
- Blur V3
- Highball V1, V2, V3
- Tallboy LT V1.1
- Tallboy V1.1, V2, V3, V4 (MY20 & MY21 only)
- High Tower V1 and V2(MY20 & MY21 only)
- High Tower LT V1
- Mega Tower V1
- And Juliana Equivalents
Exact Axle Length is 168.5mm x Thread M12 x 1.0mm pitch also fits other brands that use this size.
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. Dropout Bolt is also provided.
Constructed from 7075 Aluminium and made to the manufacturer's exact specifications.
Fits the following Santa Cruz bikes:
- 5010 V1, V2, V3
- Bronson V1, V2, V3
- Nomad V2.1, V3, V4
- Chameleon V5, V6, V7
- Heckler V7
- Heckler E-Bike V8
- Heckler MX E-Bike
- Bantam V1
- Blur TR V1.1
- Blur XC V2.2
- Blur LT V2.2, V2.1c
- Blur V3
- Highball V1, V2, V3
- Tallboy LT V1.1
- Tallboy V1.1, V2, V3, V4 (MY20 & MY21 only)
- High Tower V1 and V2(MY20 & MY21 only)
- High Tower LT V1
- Mega Tower V1
- And Juliana Equivalents
Exact Axle Length is 168.5mm x Thread M12 x 1.0mm pitch also fits other brands that use this size.
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. They feature "a get out of jail" 6mm Allen key on the drive side of the axle if you manage to round the non-drive side.
- Constructed from 7075 Aluminium and made to the manufacturer's exact specifications.
Fits Yeti Bikes:
- 160E
- Arc
- SB120
- SB140 MY23+
- SB160
Note: Original part for SB120, SB140 MY23+, SB160 is 172mm length, the 174mm axle is still compatible.
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key.
- Constructed from 7075 Aluminium and made to the manufacturer's exact specifications.
- Note: This axle is not compatible with Evil Bikes
- This axle is very common with a lot of bike brands, please visit burgtec.co.uk for complete fitment info.
- Thread M12 x 1.75mm pitch
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key.
- Constructed from 7075 Aluminium and made to the manufacturer's exact specifications.
- Please visit https://burgtec.co.uk/product/trek-184-5mm-rear-axle/ for complete fitment info.
- Thread M12 x 1.75mm pitch
The Ride Wide Alloy Enduro Handlebars are the original and best wide bar.
It's the little differences that make it one of the most comfortable bars in its class. The backsweep and upsweep help the bar to the ultimate feel once tried always loved. As used by the Santa Cruz Syndicate riders Greg Minnaar, Jackson Goldstone, Nina Hoffman, and Laurie Greenland.
- 800mm width
- 9 degree backsweep
- 5 degree upsweep
- Suggested cut down marks
- Weight: 300g
Unmatched comfort and unquestionably superior vibration dampening properties. The Burgtec Ride Wide Carbon Enduro Handlebars is built to take a beating.
- Uni-Directional Carbon
- 800mm width
- 35mm bar clamp
- 20mm or 30mm rise
- 9 degree backsweep
- 5 degree upsweep
- Weight: 258g
GXP Boost 3mm Offset Thick Thin Chainring. Awesome chain line plus awesome chain retention enough said.
- 12 spd Eagle compatible.
- Designed and tested in MTB heaven, the Peak District.
- Keeps your chain on!
Pre-tension Bolt for Shimano Hollowtech II Cranks and Shimano E-bike motors.
Simplify things with an 8mm fitting and add a splash of your favourite anodised color. Never worry about turning the garage upside down at midnight to find that little 'thingy' to pre tension your cranks ever again.
- Remember this product needs minimal torque and do not exceed the manufacturers maximum recommended torque 0.7 to 1.5Nm
- Suits: XTR, XT, SLX, LX, Deore, Saint & Zee cranks and bikes with a Shimano e-bike motor.
When you've got to finish your bike off right.
The Burgtec Stem Spacers are the perfect finishing kit.
"Make a grip with the fussiest rider on the planet, you must be mad!!"
The Bartender Pro is the next level in grip design for Burgtec.
We've collaborated with 3x World Champion Greg Minnaar to hone the construction of this grip to produce unrivaled vibration dampening.
- 31.5mm Diameter.
- 30A Rubber Compound
- Single Lock On
The Goats Grip just went Super Soft.
Prototyped through the 2020 season and based on the World Cup Winning pattern of the Bartender Pro as used by Greg, as well as Nina Hoffman, Danny Hart and Angel Suarez.
- Super Soft Compound
- 31.5mm Diameter
- Single Lock-on
- Tapered Core
The Pilot is the union of Chromag's extensive flat pedal design combined with a proven, dual sided SPD compatible cleat engagement system. With a long, 110mm body, the Pilot's pins reach beyond the cleat channel of most shoes to provide a secure 4-point pin contact between shoe and pedal. The Pilot features our F.1 high-strength chromoly axle system, with a double seal, inner bushing, and outer cartridge bearing.
The Pressure is simply a refinement of our ever popular Contact pedal. The Pressure has a longer body than the Contact, but retains the smallest Q-Factor in the fleet. This makes it ideal for DJ and freeride, but many riders do like to use them for DH and trail riding too.
Page 1 of 218
Next page