Parts & Accessories

When your solo ride turns into a weekend expedition with friends, the NV 2.0 Add-On lets you increase the NV 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks - Trail Doc compatible - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - Premium gloss metallic powder with water transferred logos - Compatible with 2” NV 2.0 - Increases 2” NV 2.0 carrying capacity to 4 bicycles weighing up to 40 - pounds each - Holds wheelbases up to 48” and tires as large as 4.8” - Quick change from 2 to 4 bikes

This add-on to Thule's T2 Classic platform hitch rack allows 4 bike capacity (2"/50mm recievers only). - Secure bikes quickly without frame contact with the frame-free ratcheting arm - Bike-to-bike interference is eliminated with fully adjustable bike mounts - Ideal for carbon frames, mountain, downhill, and fat bikes as it fits 20 - 29” wheels and up to 5” tires without adapters

- Expands the DrTray carrying capacity - Securely carries road bikes, mountain bikes, and up to 5" fat bikes - Quick and easy to put on and take off - SKS cable lock system secures both wheels and frame to help prevent theft - Elevated for added clearance between bikes - Max bike weight 40lbs - 11.5" spacing between bikes plus elevated - Weight 14lbs

Hollywood's Sport Rider SE2 2-Bike Add-on Kit lets you carry an additional 2 bikes on your next adventure. It connects easily by sliding the add-on kit into the base unit (sold separately), inserting the attachment pin & clip, then tightening the lever. - Weight: 45 lbs - Capacity: 2 bikes, max 45 lbs per bike - Fits models HR1450, HR145R, and HRT220 - Space between bikes: 10 inches - Not to be used on any trailer, fifth wheel, or towed vehicle

A flexible, kayak carrier with felt-lined saddles that make it easier to load and unload. Features - Easily load and unload the kayak with the pivoting felt-lined rear saddles that help glide and center a kayak onto the vehicle - Two independent pivoting saddles with angle-setting lever conforms to limitless range of hull shapes - Protects the hull with large, flexible, cushioned pads - Quickly secure the kayak using the center load straps with car-protective buckle bumpers and QuickDraw bow and stern tie-downs - Fits a variety of Thule rack systems, round bars and most factory racks due to T-Track and FlipFit brackets - Accommodates kayaks up to 36 in/90 cm wide and 75 lbs/35 kg Technical specifications - Load capacity: 75 lb - Dimensions: 5 x 8 x 5.5 in - Weight: 6.8 lb - Length of straps: 2x15' - Fits AeroBlade, SquareBar, and Xsporter Pro

A versatile, horizontal kayak carrier with large cushioned, flexible pads that conform to a large range of hull shapes as well as SUPs. - Protects the hull with large, flexible, cushioned pads - Fits a variety of Thule rack systems, round bars and most factory racks due to T-Track and FlipFit brackets - Accommodates kayaks and SUPs up to 36 in/90 cm wide and 85 lbs/40 kg - Easily secure the kayak or SUP using the center load straps with car-protective buckle bumpers and QuickDraw bow and stern tie-downs - Can carry a variety of hull shapes as well as SUPs with two independent pivoting saddles with angle-setting lever

Our burliest crossbar ever, the HD Bar is the one for heavy loads, rugged terrain and maximum utility. It delivers the muscle our new truck racks demand, and works with our StreamLine towers to get the heavy-duty job done right. The engineered aluminum construction provides superior support without weighing things down, integrated tie-down points to simplify load security, and T-slot attachment technology for adding gear mounts the fast, easy way. The Yakima Way. Product Details: - Strong, lightweight aluminum construction handles heavy loads great for rooftop tents - Integrated tie-down points on endcaps make it easy to secure gear - T-slots top and bottom to easily add Yakima and compatible gear mounts - Includes rubber infill for top T-slot for load protection and wind noise reduction - Built to last and look good doing it with a durable black powder-coat finish - Compatible with all StreamLine towers with our new HD Bar SL Adapter (sold separately #8003541) - Available in variety of lengths 55"/60"/68"/78" to create custom set-ups

NEW! Blue groomers and fresh powder, the FreshTrack 6 is the perfect mount for loading the crew and finding first tracks. Wide enough for four boards or six pairs of skis, simple to mount on virtually any roof rack, no tools needed, and super easy to use, it's great for quick getaways and dawn patrol starts. One-button access allows gloves-on operation, and the built-in SKS locks secure your gear. Product Details - Easily carries six pairs of skis up to 120mm wide at the tip - or four snowboards - Tool-free clamp design makes install and removal a breeze - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Includes SkiLift attachment to provide clearance for tall bindings - Integrated SKS (Same Key System) locks included for added security Product Specs - Weight: 9.90 lbs - Dimensions: L 35.00" x W 5.75" x H 7.25" Installation Details - Some Assembly Required - Tool-Free Install - 25 Minute Install

No rails? No problem. The versatile BaseLine’s intelligent design and advanced adjust ability help it morph to the shape of your car’s roof for a sleek, secure, load-it-up fit. - Secure, easy-to-use tower specifically designed for cars without roof rails or gutters - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - Tri-axial DropHook clip adjustment easily adjusts to a wide range of roof shapes for safe, secure hold - BarBed has 12° of pitch adjustment to optimize tower position and level bars on rounded roofs - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating - Easily locks to you vehicle with our SKS system (sold separately) - RoundBar SL Adapter required to use Yakima's classic RoundBar with - StreamLine System Towers (sold separately) - Streamline crossbars are compatible with any StreamLine Tower StreamLine Tower TECHNICAL SPECS - Dimensions: L 5.00” x W 6.00” x H 4.00”

Take sleek to a new level – the ingenious RidgeLine Towers integrate with flush-mount factory side rails so you can build a real rack that carries more. Strong and versatile, they attach easily and have a sleek design that aligns with your vehicle’s aerodynamic attitude. - Attaches a base rack system to vehicles with flush-mount factory side rails. RidgeClips and crossbars required for a complete system. - Both are sold separately. Use Fit My Vehicle to find the clips and crossbars. - Advanced design is strong and quiet and aligns with aerodynamic vehicle aesthetics - Works with JetStream, CoreBar and RoundBar crossbars - Unique clip design adapts to your rails for a secure, accurate fit - BarBed has 12° of pitch adjustment to optimize tower position and level bars - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating - Easily locks to you vehicle with our SKS system (sold separately) - RoundBar SL Adapter required to use Yakima's classic RoundBar with - StreamLine System Towers (sold separately) - Streamline crossbars are compatible with any StreamLine Tower StreamLine Tower TECHNICAL SPECS - Weight: 1.25 lbs - Dimensions: L 5.00” x W 5.25” x H 3.50”

Roll your own way – the SkyLine Towers work with our Landing Pads to create a customizable, mega-versatile, super easy-to-use system that easily handles your unique personality and extensive range of gear. - Complete SkyLine Tower set - Secure and simple – may be the easiest-to-use rack system out there - Fits all styles of Landing Pad (required) - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - BarBed has 12° of pitch adjustment to optimize tower position and level bars on roofs with curved flush rails - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating\ TECHNICAL SPECS - Weight: 1.00 lbs - Dimensions: L 4.50” x W 4.50” x H 3.00”

Extend your capacity – the TimberLine attaches to factory racks with raised side rails to expand your carrying capacity and deliver maximum rooftop versatility. Secure and super-sleek, they are quiet, simple to install and work with all of Yakima's bars. - Complete set of TimberLine Towers - The totally new Yakima tower for vehicles with raised side rails. - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - Strong, durable stainless steel strap to accommodates a range of rails - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating - Easily locks to you vehicle with Yakima's SKS system (sold separately) - RoundBar SL Adapter required to use Yakima's classic RoundBar with - StreamLine System Towers (sold separately) - Streamline crossbars are compatible with any StreamLine Tower StreamLine Tower TECHNICAL SPECS - Weight: 5.00 lbs - Dimensions: L 6.00” x W 3.50” x H 3.00”

Creating the world's most aerodynamic and colorful bike racks since 1993, we've leveraged our knowledge of the bike rack industry and it's ever changing technologies to create the world's most versatile and elegant platform hitch rack. Perfect for the bike enthusiast or recreational rider, the SplitRail Single Add On pairs with the 2" SplitRail to accommodate 3 or 4 bikes. Each add on is engineered with 4" of side-to-side adjustment, which makes fitting anything from kids to adult bikes simple and easy. An integrated cable lock secures bike to rack (lock core and keys included). 40lb max weight per bike with add on(s). 3-bike configuration: 12" spacing (on center) between bikes. 4-Bike configuration: 12" spacing (on center) between bikes one and two; 9" spacing (on center) between bikes two, three, and four. RockyMounts stands by its products by offering a lifetime warranty. - Compatible with 2" SplitRail (SKU 1140, sold separately) to expand carrying capacity to 3 bikes (requires oneAdd On) or 4 bikes (requires two Add Ons) - Lightweight chromoly and aluminum construction - Fits bikes with 20-29" wheels and "Plus" size tires. 48" max wheelbase - 4" of side-to-side tray adjustment for simple and easy loading and unloading of bicycles - Integrated cable lock secures bike to rack - Due to weight restrictions of 1.25" hitches, the SplitRail Single Add on can only be used with the 2" SplitRail - SplitRail rated 5 out of 5 stars on MTBR (August 2016) - RockyMounts offers a lifetime warranty on all of our products - Want to match keys to your existing SplitRail or any other RockyMounts products? Simply add your key number (ex. E144) in the "comments" field at checkout

Easy-to-install foot for Thule Evo roof racks, for vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Load carrier feet for Thule Evo roof rack system - Foot installs easily onto vehicles without pre-existing roof rack attachment points - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Quick assembly and install with click-in mounting brackets. No additional tools required - Securely holds the rack to the vehicle thanks to patented clamping technology - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car

Easy-to-install foot for Thule Evo roof racks, for vehicles with raised railings. - Load carrier feet for Thule Evo roof rack system - Foot installs easily onto vehicles with raised railings - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Rubber lining protects the surface of the raised railings and ensures a perfect fit - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car

Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 108cm / 43 in

Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 118cm / 47 in

NEW! Perfect for family weekends or ditching work on a powder day, FreshTrack 4 is made for loading up and finding first tracks. Wide enough for a couple of boards or four pairs of skis, simple to mount on virtually any roof rack, no tools needed, and super easy to use, it's great for fresh powder and blue groomers. One-button access allows gloves-on operation, and the built-in SKS locks secure your gear. Product Details - Easily carries four pairs of skis up to 120mm wide at the tip or two snowboards - Tool-free clamp design makes install and removal a breeze - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Includes SkiLift attachment to provide clearance for tall bindings - Integrated SKS (Same Key System) locks included for added security Product Specs - Weight: 7.94 lbs - Dimensions: L 25.25" x W 5.75" x H 7.25" Installation Details - Some assembly required - Tool-Free Install - 25 minute install

Go BigStack to go big! Mount up to 4 boats on your roof, or use that room for other gear for a multi-sport adventure. HullGuard padding keeps your boats safe and universal mounts fit nearly any shape crossbar. - Folds when not in use for better aerodynamics - Tool-free installation Fits Yakima round, square, factory, and aerodynamic bars - Top-of-the-line Hullguard padding keeps your boat protected during transport - SteelCore construction uses a steel tube frame for superior strength - Integrated ramp system makes it painless to load your boat - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs Integrated bottle opener - SKS Locks sold separately - Minimum crossbar spreads of 24 inches\u001D or more

Protect both your bikes and your pick-up on your next adventure with heavy-duty, adjustable, padded protection. Features - Flexible padding adjusts across a wide range of tailgates and large handle opening provides backup camera visibility - Bikes remain securely in place with integrated bike separation and multiple position strap anchors - Bikes and pick-up trucks are protected during transport with heavy duty vinyl, adjustable padding - Gear can be stored securely, even while driving, due to the inside-facing mesh pockets Technical specifications - Dimensions: 59 x 16 x 2.75 inch - Weight: 6.5-pound

This is a one bike add-on to turn your MonoRail 2-inch (sold separately) into a three bike carrier. Simply remove the end cap from the MonoRail, slide the attachment in and it quickly secures with two bolts. The cable lock included with the MonoRail is long enough to secure all three bikes. Simply and easy. Not compatible with 1.25-inch MonoRail.

This standard J-style cradle delivers superior carrying performance and protection with its 4-touchpoint adjustable padding and rust resistant steel design. - Steel design with adjustable padding for carrying strength and kayak protection - Quick on/off hardware ensures fast installation and removal - Wide mouth J-profile offers easier loading and unloading - Optimally sized J-style carrier leaves roof space for other Thule accessories - AllSurface rust-resistant coating and hardware for longer product life - Carries 1 kayak and requires 1 person to load and unload - 1 to 4 carriers per vehicle - Includes all straps to transport 1 kayak - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately) - Primary watercraft: Kayak

The GateKeeper tailgate pad is a perfect companion for pick-up bed bike transport. The durable nylon exterior protects your bike from your truck’s tailgate while the soft felt backing keeps your truck’s paint protected. Integrated SitTight bike cradles add extra stability and protection for your bikes and the HindSight tuck-away cover opens up the view for your back-up camera, leaving you with a worry free shuttle to the top. - Tailgate pad for your truck that securely carries your bikes to the trailhead - NEW Cushioned SitTight cradles protect bikes from shifting and sliding - NEW HindSight cover tucks out of the way so your back-up camera can do its job - NEW Velcro cradle closure system is easy on carbon bike frames and painted surfaces - Rugged nylon outer material resists abrasion and weather damage - Extra soft felt backing protects your truck’s paint job - Integrated strap management system keeps the pad tight and secure on the way up the mountain - Medium size has a 5 bike capacity and fits mid-size & some older full-size trucks - Large size has a 6 bike capacity and fits most full-size trucks - Medium Dimensions: 53-inch Long x 5-inch Wide x 17-inch Tall - Large Dimensions: 62-inch Long x 7-inch Wide x 20-inch Tall

- Outer pad is constructed of 600D + PVC. A durable denier fabric with herringbone weave and DWR treatment for water repellency - Micro-brushed inner lining protects your tailgate from rub and wear marks - Raised bumpers facing into the truck box seat most frames snugly preventing bikes from coming into contact while shuttling - Raised square pads along the outer tailgate (small pad only) offer the additional security of holding forks in place - When the shuttle gets steep and rowdy, secure frames down with a Velcro-backed webbing loop and strap system - Grommet system offers the ability to lock bikes - Storage pocket - Two sizes - Small - 39.5" x 57" wide with 5 straps, Large - 47” x 61” wide with 6 straps

An RV compatible 2" hitch base for use with any SuperClamp 2-bike hitch rack. - Make your existing SuperClamp 2-bike hitch rack RV compatible (Class A, B, & C Motorhome). - A 2-inch base compatible with all SuperClamp 2-bike hitch racks (4025, 4025C, 4025F, 4026F). - For use with 2" receivers only. - Hitch pin and hardware sold separately.

Wind fairing that redirects airflow over roof rack for a quieter ride. - No tools required for assembly or installation. - New system-specific clamps (included) provide the roof rack fairing a clean and secure mounting for our - AeroBlade, AeroBlade Edge and SquareBar systems. - AeroBlade and AeroBlade Edge clamps give full access to the upper T-track for quick accessory mounting and removal. Technical specifications - Length: 32-inch - Fits Thule AeroBlade - Fits Thule SquareBar

Wind fairing that redirects airflow over roof rack for a quieter ride. - No tools required for assembly or installation. - New system-specific clamps (included) provide the roof rack fairing a clean and secure mounting for our - AeroBlade, AeroBlade Edge, and SquareBar systems. - AeroBlade and AeroBlade Edge clamps give full access to the upper T-track for quick accessory mounting and removal. Technical specifications - Length: 38-inch - Fits Thule AeroBlade - Fits Thule SquareBar

Wind fairing that redirects airflow over roof rack for a quieter ride. - No tools required for assembly or installation. - New system-specific clamps (included) provide the roof rack fairing a clean and secure mounting for our - AeroBlade, AeroBlade Edge, and SquareBar systems. - AeroBlade and AeroBlade Edge clamps give full access to the upper T-track for quick accessory mounting and removal. Technical specifications - Length: 44-inch - Fits Thule AeroBlade - Fits Thule SquareBar

Wind fairing that redirects airflow over roof rack for a quieter ride. - No tools required for assembly or installation. - New system-specific clamps (included) provide the roof rack fairing a clean and secure mounting for our - AeroBlade, AeroBlade Edge, and SquareBar systems. - AeroBlade and AeroBlade Edge clamps give full access to the upper T-track for quick accessory mounting and removal. Technical specifications - Length: 52-inch - Fits Thule AeroBlade - Fits Thule SquareBar

Transport you kayak safely with these custom designed saddles that conform to the most popular hull shapes. - Integrated rubber pads protect the hull and help hold the kayak in place for transportation - Carries 1 kayak and requires 1 person to load and unload - Includes all straps to transport 1 kayak - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately) - Primary watercraft: Kayak