Other

For riders looking for comprehensive coverage to protect high risk areas of a dual-suspension eMTB frame. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap, and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models, and sizes - Designed around e-mountain bike geometry - Designed for maximum coverage with minimal trimming - The Covered Dual Suspension eMTB Kit includes protection for toptube, downtube, 4 stays, seat tube, and extra pieces to provide approximately 60% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

For riders looking for comprehensive coverage to protect high risk areas of a Hardtail MTB frame. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10 year warranty. - Matte clear film - Fits all makes, models and sizes - Designed for maximum coverage with minimal trimming - Designed around hardtail mountain bike geometry - The Hardtail MTB Kit includes protection for toptube, full downtube, 4 stays, seat tube, and extra pieces to provide approximately 60% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

For riders looking for comprehensive coverage to protect high-risk areas of a Steel Hardtail MTB frame. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models and sizes - Designed for maximum coverage with minimal trimming - Designed around hardtail steel mountain bike geometry - The Steel MTB Kit includes protection for toptube, full downtube, 4 stays, seat tube, and extra pieces to provide approximately 60% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

For riders looking for comprehensive coverage to protect high risk areas of a Road or Gravel frame. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap, and other elements while out on the trails and roads. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models, and sizes - Designed for maximum coverage with minimal trimming - Designed around road and gravel bike geometry - The Covered Road & Gravel Kit includes protection for toptube, full downtube, 4 stays, seat tube, and extra pieces to provide approximately 60% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker-sheet

UNICLIP ROAD PATCH KIT The Shadow UniClip road patch kit tucks two CO2 cartridges and essential flat repair tools cleanly under the saddle for emergency flat repairs on the road or trail. FEATURES: - UniClip accessory mount system allows attaching road patch kit and taillight at the same time for the best taillight visibility while riding. - High-quality rubber strap to provide stable secures for an inner tube. - Includes 2 16g threaded CO2 cartridges and CO2 inflator. - Uniclip saddle mount included.

The STL-3K is kit that will add a back rest to the STL-1.2 work stool (sold separately). The STL-3K includes a back rest, two steel support bars, and fasteners. NOTE: The STL-3K will only work on the STL-1.2 work stool. The previous STL-1 work stools will not accept the STL-3K

Zipp Vuka / Stealth Riser Kits - Bolt kits sold separately

You are not required to haul humanoids with your Surly Longtail Cargo Bike, but if you choose to do so, you may invite them to rest their hooves on the Surly Round Pegs. If your hitchhiker would prefer to dangle their lower extremities all willy nilly instead of placing them on the Round Pegs, that is fine. The Round Pegs do not have feelings. They are made of 6061-T6 aluminum, sold as a pair, and compatible only with Big Easy, Big Dummy, and Big Fat Dummy. - 6061-T6 alloy construction - Sold as pair

We understand that your bike is a prized possession and leaving it unattended, even when secured, can be risky. Scout provides unparalleled bike security by combining both an extremely loud 85db bike alarm function with a highly accurate bike finder, using Apple’s ‘Find My’ app. The future of bike security is here. Once armed, any movement of a Scout fitted Bike will trigger the motion-sensitive audio alarm discouraging any further movement and alerting the bike’s owner, both by the sound of the alarm and via a notification that is automatically sent to the owner’s iPhone (when in Bluetooth range). Then in a scenario where a bike fitted with Scout is not where the owner has left it, it can be quickly located using Apple’s network via the ‘Find My’ app. - Compatible with iOS only - Motion-sensitive 85 db audio alarm for immediate deterrence - Can be located quickly using Apple's 'Find My' app - Operated using Knog's iOS app - Mounts to standard water cage braze-ons - Can be mounted under water cage for discretion - Use supplied anti-tamper screws to mount securely - Neon silicone cover provided to advertise security device (if desired) - Arm / disarm using button (within 1.5 m) on app within bluetooth range - LEDs show alarm status & battery charge - USB-C rechargeable with 2 to 6 month battery (pending usage) - Low battery notifications when you have just 20% remaining - Water resistant IP66 rating (wash-proof) - Weighs just 25 grams - USB-C charging cable not included If you want peace-of-mind that you've done everything you can to secure your bike, Scout Bike is an essential piece of kit.

Heavy duty aluminum double kickstand with 28mm-36mm adjustable length (from bottom plate vertically). Legs fold up to one side. Strong enough for cargo bikes and some e-bikes. Weight is approx 860g.

Rain cover with a clear plastic front window that is easily attached to your Thule Bexey dog bike trailer. It protects your dog on rainy days and offers additional warmth during the colder months. Cover your dog bike trailer with a rain cover Desgined with dogs in mind The Thule Bexey rain cover keeps your dog comfortable and ensures they stay dry during the ride. The transparent material lets you and your dog see each other during the ride while allowing optimal airflow into the trailer. This way your furry friend won't get too hot or uncomfortable, even when it's raining outside. The rain cover accessory is easy to install onto your trailer using the designated attachment points on the top and front of the trailer. This ensures a secure fit that will keep the cover in place, even during windy or stormy weather. Optimal airflow - The rain cover is designed to maintain optimal airflow into the trailer, ensuring your dog stays comfortable the entire ride Easy to install - The Thule Bexey rain cover is easy to install onto your trailer using the designated attachment points on the top and front of the trailer

Introducing the Piston® Pro X LICENSE PLATE MOUNT. Simply remove the endcap, and attach the mount to achieve unparalleled visibility on the road. Upgrade your ride and hit the road with confidence and style. - For use with Piston® Pro X - Billet machined aluminum - Rotates for use in stowed or in-use position - Black Anodized

Genuine replacement parts The right parts for the right bike.

The K-Edge Road Clamp Chain Catcher functions the same as the original chain catcher, but it mounts to its own CNC sculpted lightweight clamp. K-Edge's Road Clamp-on Chain Catcher improves overall function of your drive train while protecting your valuable frame from a dropped chain. - Prevents missed front shifts and frame damage from a dropped chain - For use with clamp-on front derailleurs - Clamps below and adjusts independently of the front derailleur - Precision machined, anodized 6061 T6 aluminum - 23 grams

- Accessory for the Shotgun 2.0 MTB seat - Allen key fixing for easy fitting, removal and adjustment - 250mm in length, with Pro 19mm rubber grips designed for little hands - Comes with inserts to fit 25.4mm, 31.8mm and 35mm handlebar diameters - Suitable for flat or riser style handlebars - Your child will love riding up front when they have their own handlebars and grips to hold onto

- A Threadless no tap install option that lets you store the EDC V2 Tool inside your stem/steerer tube without threading your steerer tube - The Threadless Carrier replaces your star nut and lets you preload your headset with a bolt, while also creating a space for the EDC Tool. - Easy to install in less than 10 minutes. - Compatible with EDC V2 Tool (You must use the small EDC V2 Storage Capsule with the Threadless Carrier.) The tire plug and bacon strips fit within the small storage capsule. - Chain pliers are not compatible with the threadless carrier set up. - The EDC Threadless Carrier is NOT compatible with V1 EDC Tools (Green Multi-Tool)

Ursus Jumbo Kickstand features a double legged center-mount design that's strong enough to stabilize your bike up to 170 lbs. Ursus Jumbo kickstand is ideal for electric bikes as well as overloaded touring or commuter bikes. The distance between the two legs when legs are expanded is 40cm (15.7").

INVISIBLE INFLATION Lightweight, firmly attached and quiet, but easily accessible when you need it, the Giant Clutch Fork Storage kit fits a CO2 cartridge and inflator right into your fork’s steerer tube and helps you ride pack-free. FEATURES: - Invisible until you need it - Multiple taper mounting design - Rubber mallet installation, no need for any glue or adhesive - Carries a 16g or 25g CO2 cartridge and inflator (cartridges sold separately) SPECIFICATIONS: - Tools: 16g or 25g CO2 Cartridge, CO2 inflator Sizes: 160 x 40 x 21mm - System: Compatible with RockShox & Fox & DVO Forks - Weight: 118g (with a 25g CO2 cartridge) - Material: Aluminum

Universal kit designed to fit all bikes and sizes. Includes 6 easy-to-trim pieces for top tube, downtube, chainstays, and seat stays. - 10 mil guards protect frame from scratches, chips and shuttle/cable rub - Applying to road or gravel bike? Simply narrow pieces to desired width using scissors or exacto knife - An affordable way to customize your bike with rad designs - Made in the USA

Color kits for OneUp riser bars plus some extra stickers for whatever you choose Third party online sales are strictly prohibited by the manufacturer

Attach your bike computers, lights, bells, or other bike accessories directly ahead of your ShockStop Suspension Stem. The out-front position keeps things within your line of sight and within easy reach. Benefits: - Conveniently place your component directly in front of your stem within easy reach - 4 different mounting positions let you fine-tune the fit of your bike component Details: - Fits ShockStop Suspension Stem only - 4 different mounting positions Compatibility: - 25.4 mm (1-inch) tube diameter allows flexible mounting of most components

The Ursus BIG FOOT center-mount kickstand is an alloy double kickstand and has the capacity to hold up to 110 lbs. Suitable for bikes with extra cargo or a child seat. The plastic feet attached to the BIG FOOT kickstand is extremely strong and prevents the stand from slipping while in use. Kickstand length is 300 mm. BIG FOOT is designed to work with 28" wheeled bicycles. In order to fit this to your bike, you need to check if you have a kickstand plate welded to your bike frame. This can be found just behind the bottom bracket. Comes with an assembly kit that includes alloy plate, conical washer, 4 bolts (75mm, 65mm, 40mm, 22mm). Select the correct bolt length for your bicycle.

Wheels Manufacturing, Zip Ties, Jar of 600, Black

Our Kashima gold Geo Deco design is subtly classy, just like you. Frame protection is clear so your frame will be visible. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.

A modern halftone camo pattern that looks great on dark and light bikes alike! Frame protection is clear so your frame will be visible. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.

Mid-century modern has finally escaped the living room and gracefully landed in our newest collection, Maze Runner. It’s our classiest design yet, available in three righteous colorways across our fender, frame keeper and topcap lineup. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.

No graphics. No logos. Just a clean layer of protection, available in matte or gloss. Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.

- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips, cable rub and other damage to your forks - Durable, weatherproof 3M adhesive - 8-piece pack is designed to fit most front suspension forks

• Aluminum double kickstand • Includes top plate • Adjustable for bikes from 24" to 700c

MOUNTAIN RESCUE The Clutch Bar End Storage is a cleverly stashed, simple-to-use tubeless tire repair kit, that includes one tire plug tool and five spare tire plugs. The Clutch Bar End kit fits with virtually all aluminum and carbon handlebars without adding significant weight. FEATURES: - Quickly and easily mounts inside the handlebar - Compatible with virtually all aluminum & carbon fiber handlebars - Includes tire plug tool 5 spare tire plugs SPECIFICATIONS: - Tools: Tire plug tool, spare tire plug x10 - System: Compatible most common MTB handlebars - Sizes: 100 x 28 x 14mm - Weight: 34g - Material: High-density plastic

The Surly Deck Pad is the ultimate in cargo bike derrière accessories. Sold individually, the Surly Deck Pads are designed to easily attach to the rear decks of our Big Easy, Big Dummy and Big Fat Dummy for a luxurious passenger riding experience. Simply put, they make riding on the back of our cargo bikes even nicer. Two Pads will cover the whole deck, so there, now you know. You could probably even convince your ride-along friends or children to chip in and help pay for them. After all, nobody rides for free. - The Deck Pad mounts to the Dummy Deck to provide a soft platform for passengers large and small - Sold each - Also available as part of the Corral Kit - Individual Deck Pads measure approximately: 13”x8”x2”

Carrying your bike has never looked so good. It's okay to take help every once in a while Attach to your seatpost and downtube to easily transport your bike up, down, and all around. As part of our Faux Leather collection, this bike carry handle helps you maneuver throughout the city. Product details - Fits pedal bikes and e-bikes - Includes two regular straps at 165mm long - Includes one long strap at 300mm long - Matching saddle, tool bag, and grips available

- EverClear is an 8-micrometer (µm) high-quality frame protection film - Each sheet is 2-feet x 8-inches. - It's designed to protect your frame against anything from rock chips to cable rubs and everything in-between. - Included is a sheet large enough to cover your down tube, top tube, chain-stay, cable rub points and crank arms. Also works great for fork lowers, shock bodies, and more! Especially great for protecting carbon frames or decals. - It’s easy to cut and apply; simply trace and cut your desired pattern(s), clean your surface, and apply where necessary! - Want to boost re-sale value of you bike? EverClear is your ticket! By applying this stealthy 8µm protection to your frame when it’s new, you can preserve that new look without using any bulky and ugly frame protection. Then, when it’s time to sell, you can remove the EverClear, and you are left with a beautiful like-new bike that’s ready to get top dollar in re-sale. - Made in the USA

- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against chain slap, scratches, scuffs, stone chips, cable rub and other damage to your chainstays - Durable, weatherproof 3M adhesive - 20-piece pack is designed to fit chain stays and rear stays on most bikes

The solution for protecting your disc brakes during maintenance or transit. The patent pending eye catching design makes life simple, fast and easy to use, Muc-Off's disc brake covers help to ensure you won't have protectant or lube overspray on your discs. - Sold in pairs - Protects rotors from lubricant and brake oil - Fits all MTB and road rotors - Made from breathable neoprene - Rinse and hang dry after use

An aluminum kickstand that mounts just to the chainstay (instead of bridging the seatstay and chainstay). Try it on bikes that have disc brakes. Not recommended for carbon fiber chainstays.

The soft handlebar padding allows your child to rest their head comfortably during the ride. Features - The head rest attaches easily to the Thule Yepp Mini handlebar

Replacement part

Most riders should protect the lowers and crowns of their Road & Gravel forks. Fork protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the fork. RideWrap protection kits are high-quality polyurethane films that are applied to the fork to protect lowers and crowns from scratches, rock chips, and/or scuffs caused by trail debris, rocks, and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models, and sizes - Designed for maximum coverage with minimal trimming - Designed around mountain bike fork geometry - The Covered Fork Kit includes protection for crowns, lowers, and extra pieces to provide approximately 60% fork coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

Most riders should protect the lowers and crowns of their MTB forks. Fork protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the fork. RideWrap protection kits are high-quality polyurethane films that are applied to the fork to protect lowers and crowns from scratches, rock chips, and/or scuffs caused by trail debris, rocks, and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models, and sizes - Designed for maximum coverage with minimal trimming - Designed around mountain bike fork geometry - The Covered Fork Kit includes protection for crowns, lowers, and extra pieces to provide approximately 60% fork coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

Converts quill style forks to use threadless stems.

Even the best can be better. The first version of this kickstand had been conceived, designed and manufactured by URSUS in 2005. There wasn’t any similar product, incredibly resistant and aesthetically beautiful, 100% MADE IN ITALY: very soon it became a bestseller and we protected it with an international 20-years patent. We still ship 9 million pieces per year all over the world. After about 10 years, we restyled our bestseller to make it even better by adding an enlarged crank bumper to ensure better protection against impacts, and a bigger foot, designed to easily adapt to any kind of ground surface.

Easily carry everything you need for trailside repair, in a secure out-of-the-way location. The engineered design and rubber material of the sleeves keeps everything securely in place, prevents the multi-tools from rattling, and protects the multi-tools from dirt and moisture while still being simple to remove without tools. Extra space was created in the bar plugs to store a Presta-to-Schrader adapter and valve core or a master link for support on the trail. - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Included Drop Bar Fit Kit to customize fit for larger-diameter road handlebars - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)

Reusable zip ties - 200mm long x 7.4mm wide - 100 pieces

Keep your bleed kits organized and your workbench clean. The JH-4 mounts to any flat surface and securely stores and organizes your Park Tool Hydraulic Brake Bleed Kit, with purpose-designed holders for the fittings, hoses, syringes, and other accessories, plus a separate drip tray that allows hoses to drain worry-free. The JH-4 is constructed from durable powder coated steel and includes stickers for clear labeling of mineral oil or DOT fluid bleed kits. - Assembled dimensions (main assembly): 16" x 1.66" x 2.38" (406 x 42 x 60 mm) - Assembled dimensions (drip tray): 9.75" x 1.85" x 3" (248 x 47 x 76 mm) - Mounting holes spaced for 1” or 38 mm center-to-center pegboard holes - See instructions for mounting holes and recommended spacing - Mounting hardware not included

Giant's Mobility Kickstand attaches to your bike's frame at the rear dropout for convenience and easy access.

Everybody knows you can't really shred without a solid power stance. The Power Stance kickstand is the whammy bar of kickstands. Take your city shred session to the next level when you slam down the Power Stance. WEOW WEOW! Built with e-bikes, cargo bikes, touring bikes and commuters in mind, the Power Stance is incredibly sturdy. The length is adjustable by the push of a button for quick installation and easy adjustment if parked on uneven ground. Lean easy for years to come with the ultra burly Power Stance kickstand. - Direct mount version - Burly construction is great for supporting heavy bikes - Adjust the length with the press of a button - Durable composite foot - Lifetime PDWarranty

The Frame Mounting Block provides the critical connection from the Dash FM and Dash X FM to your bicycle. The mounting block is easily installed on bikes with round and oval frame tubes—simply snap the mounting rails into place, fasten the safety strap, and quickly get on your way. Pick up a spare mounting block to install on each of your bicycles for quick transitions.

Kickstands make it easy to park your bike anywhere while keeping it from getting damaged. - Clamps to rear chainstay - Hardware included Specifications: - Length: Adjustable - Mount: Rear - Attachment: Bracket - Leg Quantity: Single - Material: Aluminum

Greenfield's Stabilizer Rear-Mount Kickstand attaches to the rear chainstay of the bicycle so it's perfect for bikes that won't accept regular kickstands like mountain bikes. It comes complete with an extra wide rubber foot for superior stability and won't interfere with pedal action or rear derailleur cables. This is the stand of choice for law enforcement bike patrols throughout the U.S. - Fits tube sizes up to 7/8" in diameter - Certified Non-Corrosive Casting - Snap Action Mechanism - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)

The Seltzer mount is designed to carry a standard bottle cage and two threaded CO2 cartridges, in a clean and compact way. - Holds one standard bottle cage - Accommodates two threaded CO2 cartridges, up to 25g - Can be separated and installed directly to bottle cage mounts on frame - Includes seatpost adaptor and bottle cage bolts - Bottle cage and cartridges sold separately

Everybody knows you can't really shred without a solid power stance. The Power Stance kickstand is the whammy bar of kickstands. Take your city shred session to the next level when you slam down the Power Stance. WEOW WEOW! Built with e-bikes, cargo bikes, touring bikes and commuters in mind, the Power Stance is incredibly sturdy. The length is adjustable by the push of a button for quick installation and easy adjustment if parked on uneven ground. Lean easy for years to come with the ultra burly Power Stance kickstand. - Center mount version is compatible with almost any adult bicycle - Burly construction is great for supporting heavy bikes - Adjust the length with the press of a button - Durable composite foot - Lifetime PDWarranty

Stay Kit for Bluemels 26"/28" Fenders includes 4 V-Stays with ASR Safety Release for Front + Eyebolt and Nut Set. Made in Germany. 11897-Set for Bluemels 26"/28" with Black Stays & Hardware (for 11805, 11806, 11807, 11811, 11815, 11819 and 11823) 11898-Set for Bluemels 26"/28" with Silver Stays & Hardware (for 11808, 11812, 11816, 11820 and 11824)

- Chainstay-mounted adjustable kickstand - Adjusts to be compatible with 24" to 29" bikes - Large rubber/plastic boot provides a stable stand platform

The Ursus MOOI 90 Adjustable center-mount kickstand is an alloy kickstand and has the capacity to hold up to 55 lbs. The MOOI is ideal for bicycles with a center mount. The adjustable tool-free kickstand features a button that allows you to set the perfect length for your bike. The maximum load capacity is 25 kg and is suitable for bike wheels between 24" and 29".  Features a tool-free adjustment button that lets you adjust the lean angle of your bicycle to your preference. The plastic foot attached to the Mooi kickstand is extremely strong and prevents the stand from slipping while in use. Weighs 250 grams.

Ursus KING EVO R78 Adjustable rear-mount integrated kickstand (40 mm PLATE)is an alloy kickstand and has the capacity to hold up to 75 lbs. URSUS KING EVO is ideal for bicycles that are compatible with an integrated mount at the rear dropout - 40mm center to center two-bolt mounting. The adjustable tool-free kickstand features a button that allows you to set the perfect length (263mm - 333mm) for your bike.   Intended for bikes with an integrated mount at the rear dropout, this ultra-stable kickstand with an adjustable length will keep even the most stubborn bikes upright. Installation is quick and easy and the adjustable length works for bikes with wheels from 24-inch wheels all the way to 29-inch wheels. Compatible with Trek and other bikes designed with direct mount 40mm mounting holes on the rear chainstay.

Ursus BIG FOOT center-mount kickstand is an alloy double kickstand and has the capacity to hold up to 110 lbs. Suitable for bikes with extra cargo or a child seat. The plastic feet attached to the BIG FOOT kickstand is extremely strong and prevents the stand from slipping while in use. BIG FOOT is designed to work with 28" wheeled bicycles.

Stay Kit for Bluemels STYLE Fenders includes 4 black powder-coated U-Stays + ESC V-Adapter Strut Mount Set (11892). Made in Germany. 11905-Set for Bluemels STYLE 46mm Width Profile (item 11832) 11909-Set for Bluemels STYLE 56mm Width Profile (item 11835) 11913-Set for Bluemels STYLE 65mm Width Profile (item 11838) 11915-Set for Bluemels STYLE 75mm Width Profile (item 11841)

- Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available - Hand painted Japanese designs, Suzu spring-loaded lever arm strike - 55mm in diameter - Made in Japan