Seatposts

Our new EA90 seatpost applies our patent pending ISA saddle adjustment allowing for independent seat angle and fore-aft movement, helping you refine your positioning without needing to undo your rail clamps for each minute tweak. Saddle angle is then locked in place so you have the confidence your saddle will stay put after you find your fit. - Finish: Black anodized - Weight: Zero, 295g; Setback, 268g - Head offset: 0mm, 20mm - Length: 350mm w/ 80mm min. insert - Quill size: 27.2mm - Material: EA90 alloy

BSD Seatposts

- Designed using SRAM Exogram technology - Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately) - Matte Black finish

- Length: 400mm - Offset: 0mm - Clamp Style: Standard Rails - Material: Aluminum

Now available with the iconic high-polish silver finish, the Ritchey Classic Zero seatpost features the same Zero post head and zero setback as the original Zero post. Inspired by life, built to last, and providing a classy aesthetic, the Classic Zero offers no-slip saddle engagement and high adjustability by securing the rails with fore and aft bolts. Whether you're cruising along rough gravel roads, remounting after running a section of slop on the 'cross course, ripping some sublime singletrack, or out on an epic road ride, the Classic Zero seatpost keeps your saddle exactly where you want it. - Material: 6061 alloy - Offset: zero - Saddle clamp: 2-bolt fore/aft - Saddle clamp torque: 7Nm (max) - Seat collar torque: not specified for seatpost—follow frame/seat binder specification - Weight: 290g (27.2 x 400mm)

Comp Carbon Zero Setpost

Dimension Alloy seatpost. - 1-piece forged AL-2014 - Clamp Style: Standard Rails - Material: Aluminum - Max Height: 245mm - Min Height: 35mm - Weight: 250g

- Built on the revered FOX Transfer platform, the Turbine R Dropper Post has infinite height adjustment with up to 175mm of drop Specs: - Seat Post Diameter: 30.9mm - Travel: 200mm - Cable Routing: Internal

- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post - Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head - Angled clamp bolts allow easy tool access for hassle free adjustment and tightening - The rubber seatpost grommet fully seals the post to prevent water entering your seat tube - Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon - Wide lower cradle gives extra rail support for lightweight saddle rails - Narrow upper cradle increases the amount of forward/back saddle adjustment - Tilt Adjustment 6° up 12° down with Zero offset

We designed the Tall & Handsome with strength and elegance in mind, but also to be super easy to setup and adjust. Like all PAUL components, it’s built to the highest standards for tolerance, function, reliability, and ease of use. Machined by us here in sunny Chico, California. - Nice looking seatpost is built to the highest standards for function and ease of use - Head and shaft are made from a special high strength 2024 aluminum alloy - Two bolt head offers roughly 15 degrees of tilt adjustment - 26mm clamp setback. 320g - Made in the USA

It’s a traditional straight up pivotal design with a 200mm length.

Bike fit is important - a bike should feel like an extension of the body, especially when dialed in. Getting just the right saddle position is second-to-none when putting out power over long miles is concerned. Ritchey Link posts offer two clamp positions for greater adjustability in dialing in the right fit. - 7050 Alloy 2pc Press Fit Head - 15mm adjustable setback - Reversible clamp for greater fore/aft adjustability - Finish: BB black

The redesigned Zero post offers no-slip saddle engagement and high adjustability by securing the rails with fore and aft bolts. Whether you're hitting rough singletrack or remounting in a hurry, this ensures the saddle stays exactly where you want it. - Material: 2014 alloy - Total length: 400mm (including 100mm of minimum insert) - Saddle clamp: 2-bolt fore/aft - Saddle clamp torque: 7Nm (max) - Seat collar torque: not specified - follow frame/seat binder specification - Weight: 240g (27.2x400mm)

TruVativ's Stylo T30 Seatpost is constructed with a 1-piece 3D-forged 7050 aluminum tube to be light and strong. The sturdy dual-bolt head provides loads of adjustability so you can fine tune your saddle position.

- Replacement seatpost for all 2009-2014 non ISP TCR, Defy, and Avail Composite, Advanced and Advanced SL bikes - 25 or -5mm offset without any additional parts

NCX Suspension Seatpost - Alloy construction - Coil spring with preload adjuster - Brass pivot bushings

- Internal Routed, Infinitely Adjustable Design - Simplistic - Fully Sealed Alloy Cage / Stainless Tip Cartridge System - Durable 3D Forged Head - With 7075-T6 Forged Clamp - Featherlight Thumb Actuation - Industry Leading - Intelligent Keyway System - Ensures Minimal Play - Easiest Installation - Cable Head Attaches At Base - Cold Weather Approved - Tested Down To -20C. - 1x Lever included - With Premium Jagwire Lex Slick Housing, Stainless Cable and Hardware

- Length: 400mm - Offset: 0mm - Clamp Style: Standard Rails - Material: Aluminum

- RaceFace Ride XC Seatposts made of forged AL-6061 - Forged, anodized and shot peened AL-6061 mast - 2-bolt head holds saddle securely while retaining easy adjustability - Weight: 295 g

The newly redesigned EC70 Seatpost takes our superlight unidirectional carbon and applies our patent pending ISA technology - Independent Saddle Adjustment - which allows for completely independent fore-aft adjustment and saddle adjustment. With the 2 pitch adjustment bolts, the saddle angle gets locked into place as if you were adjusting limit screws, and unlike single bolt designs, you get adjustability and security. Available in 20mm Setback and Zero configurations. - Finish: Matte Black UD Carbon/Matte Black Head - Weight: Zero offset, 210g; Setback offset, 223g - Head offset: 0mm; 20mm - Length: 350mm w/ 80mm min. insert - Quill size: 27.2mm - Rail clamps: 7mm round; 7mm x 9mm oval (both included) - Material: EC70 carbon

The all-new Highline XC/Gravel delivers infinite adjustment, smooth feel, and easy installation. - 27.2mm seatpost diameter to fit most XC and gravel bikes - Jagwire cable and housing - Self-contained IFP hydraulic cartridge - Internal routing - Quick-connect mechanism for ease of cable installation - Linear actuator for quick return speed - 2-bolt standard head - Drop Bar Remote sold separately

- Defined suspension on rough surfaces - Lightweight and comfortable construction - Uncompromised road cycling performance Unique comfort, lightweight and aesthetically modern: The Ergon leaf spring seatpost revolutionizes comfort on the road bike, all-road and gravel bike. Rough roads and gravel are smoothed out by the two carbon fiber VCLS leaf springs, while the saddle angle remains unchanged by the parallel displacement of the two leaf springs and the floating flip head. The precise and highly sensitive tuned leaf springs work so well that they do not affect the performance of the bike or cyclist.

Performance suspension seatposts designed to add comfort and compliance to any bike without adding unnecessary weight. With 35mm of travel, the eeSilk+ is a suspension seatpost designed to noticeably soften any gravel or mixed-surface road. These posts make great enhancements to gravel or mixed surface bikes by reducing the chatter transmitted from the surface to the rider and can be tuned to rider weight through a simple elastomer change. #5 elastomer comes pre-installed, other weight elastomers sold separately - Travel: 35mm - Length: 387mm - Weight: 373g (27.2mm); 378g (31.6mm) - Max Rider Weight: 250lbs - Offset: 12mm - Minimum Extension: 80mm - Maximum Extension: 287mm

WCS 1-Bolt mast topper for round ISP, compatible with 1-Bolt alloy clamp kits. - Material: 2014 alloy - Saddle clamp: sold separately - Seat collar torque: 5Nm (max) - Color: high-polish black

The Tuner pivotal post features a 220mm length with grooves evenly spaced every 15mm for cut lines or seat height indication. - 6061 alloy forged post - Weight: 4.6oz - Clamp Style: Pivotal

- Built on the revered FOX Transfer platform, the Turbine R Dropper Post has infinite height adjustment with up to 175mm of drop Specs: - Seat Post Diameter: 31.6mm - Travel: 200mm - Cable Routing: Internal

Ride longer, ride farther with the eeSilk premium suspension seatpost. The eeSilk is comparable in weight to traditional rigid performance seatposts while offering 20mm of vertical compliance improving control on rough surfaces and reducing fatigue on long rides. These posts make great enhancements to endurance road bikes by reducing the chatter transmitted from the surface to the rider and can be tuned to rider weight through a simple elastomer change. #5 elastomer comes pre-installed, other weight elastomers sold separately. - Travel: 20mm - Length: 375mm - Weight: 345g (eeSilk 27.2) - Max Rider Weight: 250 lbs. - Offset: 8mm

- Designed using SRAM Exogram technology - Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately) - Matte Black finish - Seat Post Diameter: 31.6mm - Seat Post Length: 400mm