Parts & Accessories
Surly's Dummy Deck provides a light, durable platform for cargo bikes, built to Xtracycle's Longtail standard — including the Big Dummy, of course. The Dummy Deck is stamped from 4mm-thick aluminum, chosen for its strength, durability, and recyclability, and it bolts directly to Surly Dummy Rails to stiffen and stabilize the whole system (it's also compatible with Xtracycle V-racks by using Xtracycle's SuperHooks). It features cut-outs for routing straps and cordage, a mounting hole for a rear light bracket, accessory-mounting holes, and countersunk holes for SuperHook hardware.
Dummy Rails support Dummy Bags on your Big Dummy cargo bike, and Surly's Dummy Deck bolts directly to them, stiffening the whole system for a more stable load. Dummy Rails are made of light, strong aluminum and were designed in conjunction with the Dummy Deck and Dummy Bags; each component works best when used with the others. Like all Surly products, they've built in lots of useful details. For example, the deck-attachment bosses stick up from the rails to create space between the deck and rails, providing windows to route tie-down straps and cordage; and threaded bottle cage bosses located at the rear of each rail provide mounting locations for accessories: bottle cages of course, or lights, cameras, pumps, flags, horns, light saber scabbards, disco balls, spittoons, cornucopias, etc. Dummy Rails will work with cargo frames (including the Surly Big Dummy) built around Xtracycle's longtail standards.
If you use an ORTLIEB Back-Roller, Bike-Packer, or Velo-Shopper for your ride to work, you may want to consider the advantages of the Commuter Insert. You pack the Commuter Insert at home – with your laptop, lunchbox, documents, water bottle, pens, smartphone, change of shoes, etc. – and then simply insert it into your pannier. The advantage is that everything stays well-organized, nothing goes mysteriously missing and nothing hides in the depths of your bag. And so you save time and avoid those nervous moments of uncertainty. While the Commuter Insert is ideal for commuters, it can also be a faithful companion to anyone who transports gear from any point A to any point B. The Commuter Insert is made of lightweight, durable nylon fabric. A padded compartment for your laptop or tablet is located directly under the handle. There is a separate pen compartment and two compartments for your smartphone and money, including an integrated key chain. The large inside compartment offers plenty of space for provisions and a change of clothes. FEATURES: - Stable and tip-resistant even when empty - Two side mounts for water bottles, etc. - Flat mesh pocket (ideal for a bike lock) - Foam padding on the sides and bottom - Ideal for use with all ORTLIEB Back-Rollers, Bike-Packers and Velo-Shoppers - Permits access to the inside pocket of your bike pannier
This rain-resistant cover for the Travoy pulls over and around your cargo, securing to the trailer frame. When not in use, it packs inside a convenient storage sack with a zippered pocket that remains attached to the frame ready for easy deployment when wet weather hits. Features: - Coated 70D nylon fabric keeps cargo dry - High viz fabric with reflective detail to keep you safe while you ride - Draw string tensions fabric around cargo - Center strap with buckle wraps around back for a secure fit - Velcro frame mount for cover storage sack - Compatibility: 2010 – Current Travoy - Weight (lbs/kg): 0.31 / 0.14
Allows Thule Yepp Maxi to be installed on a bike with a rear rack with a load capacity of at least 35 kg/78 lbs and the ability to carry seat and bike bags. Features: - Fits rear racks measuring 11-17cm/4.5-6.7" - For use on rear racks with a load capacity of at least 35kg/78lbs
Surly's Junk Straps are basically really long toe straps. They're 120cm woven nylon with a stainless steel buckle. Surly had them made to specification to ensure that they work well and last a long time. They're easy to use and they stay tight. Once you're ready, loosening them is quick and easy. They're light, pack small, and securely and conveniently attach all kinds of stuff to your rack, basket, handlebar, backpack, under your seat, around your thigh…just about anyplace. You can combine them for even longer straps. - Pack of 6
$30.00 - $35.00
Compact on-bike storage for tools and flat repair. Now updated with an oversized 30mm strap that reduces shifting during rides, the Hot Laps Gripper Bag's minimalist design stows easily almost anywhere on your bike. It's ideal for carrying essentials on a quick ride or in tandem with our larger packs on longer rides, moving weight off your back and freeing up valuable space for water and food. Keep the Gripper on your bike, and your chances of walking out of the woods are forever minimized. - On-bike storage solution - Fits spare tube, tire levers, CO2, etc. (sold separately) - Attaches under seat or at multiple locations on bike frame
Many e-bike owners are well-acquainted with this problem: bags and baskets that can't be attached to the handlebar because the e-bike display is in the middle of the handlebar. The ORTLIEB E-Bike Mounting Set comes to your assistance without forcing you to relocate the display. The lockable adapter is mounted to the handlebars with the proven cable fastener. This gives you a theft-proof way of attaching your ORTLIEB handlebar bags and baskets despite the display. The fastener is made for attachments of up to 5 kg. - suitable for all handlebar diameters up to 35 mm - duplicate set of keys - mount compatible with products by Rixen&Kaul (KLICKfix System) - bags can be locked to the handlebar with the integrated lock - additional safety in traffic thanks to the reflective material on the mount block
Ortlieb's Ultimate6 Mounting Set uses an integrated lock to secure your Ultimate6 bag (sold separately) to your bars. Additionally, the lid of the Classic, Plus and Pro models can also be locked. Whether you need one to mount the bag on a different bike or simply want spare parts for a long tour, the mounting set is an indispensable part of the Ultimate6 system.
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames
Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches
$29.95 - $34.95
The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads
Surly's Dummy Rail Collars are nothing more than a simple clamping device that buttresses the connection between your Big Dummy Frame and the Dummy Rails. They increase the stiffness of the interface of these two parts and help keep your cargo from getting its salad tossed… unless of course your Dummy Bags are filled with tossed salad. These are designed specifically for use with the Big Dummy frame and Dummy rails, and will not work with Xtracycle rails. WARNING: Properly installed Dummy Rail Collars are required for carrying live cargo on your Big Dummy.
The MIK Carrier Plate is ideal for cyclists who are looking to upgrade their frame to accommodate the MIK system. This carrier plate allows you to attach any accessory fitted with an MIK adapter to your luggage carrier in as little as one second. You’ve a wide range of accessories to consider, including panniers and baskets with ample storage. Once fitted with MIK system components, it’s as simple as clicking your preferred storage item or accessory into place. Please note, bikes already fitted with integrated MIK systems including carrier plate needn’t worry about upgrading their bicycle with this accessory. This MIK Carrier Plate is suitable for luggage racks with a width of 100-170mm. Features: - The MIK Carrier Plate is suitable for bicycle baskets and panniers from Basil. - Attach at the rear luggage carrier of conventional and electric bike frames. - The MIK Carrier Plate is designed for use with accessories that have been fitted with MIK Adapter Plates.
$24.00 - $28.00
Designed for use in the Surly Petite Porteur House. Neon color to make it easier to find objects inside a dark bag. - Urethane coated, water-resistant nylon stuff sacks - Drawstring closure
All the hardware for the lower portion of your Surly rear rack. Stainless steel.
The Lizard Skins Utility Strap is an easy way to stow essential tools and a spare tube. The minimally designed Utility Strap is a lightweight on-bike storage solution for any rider. This versatile system is made to securely attach under seats and other locations on bike frames. The Utility Strap has a wide strap and durable metal buckle. - On-bike storage solution - Inner sleeve to compress the tube - Multiple spots for tools: CO2, Tire Lever, Multi-tool, etc. - Wide strap and durable metal buckle - Silicone and rubber grip for stability - Compact and lightweight - Attach under the seat or other locations on the bike frame - Weight 4oz
Never put your phone in a plastic baggie again. Giant's Smartphone Bag is a water-resistant pouch for your smartphone with full touchscreen compatibility. It has a camera window that makes it easy to document your adventures, and a headphone port so you can jam out on your ride. And, it's sized to fit easily in a jersey pocket or pack.
$12.50 - $25.00
Surly Front Rack Hardware
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts
B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base
While the classic seat pack is a great place to store little-used essentials out of the elements, their mounting systems can interfere with and often damage modern dropper seatposts. Valais allows the use of a traditional seatbag on a dropper seatpost. - Allows the usage of seat packs on a dropper post - Protects the dropper stanchion from wear and grit - Can act as a travel limiter when full drop isn't needed - Sized by stanchion diameter
Fast and easy attachment of Topeak handlebar bags. - Clamp: Fits 25.4/28.6/31.8 mm Handlebars (shims included)
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts
A nylon shoulder strap to easily transport your bags when off the bike. A nylon shoulder strap that allows you to easily transport easily your bags with you and you are off the bike. Made with a hypalon padded details for better comfort and metal buckles to attach to any loops.
The USWE Phone Pocket is the perfect accessory for your USWE backpack. The Phone Pocket gives you the opportunity to access your phone quickly at any time without taking the pack off your back. The main compartment is meant for your phone and is accessed through the zipper on the side of the pocket. The secondary compartment is a mesh pocket on the front of the accessory. This compartment is perfect for stashing things like gels or keys for instant access. The pocket can fit a wide range of phones. The following measurements are approximately the maximum measurements a phone can have. - Standard: 14.5 cm (5.7") height x 6.5 cm (2.5") width - XL: 17.5 cm (6.9") height x 9.5 cm (3.8") width
Suitable as a tourniquet or stylish headband in a pinch, the Whip Lash's primary function is to help you attach whatever needs attaching to your bicycle frame. Available in a multi-pack that includes two 550mm lashes and one 695mm lash, the Whip Lash's potential is limited only by your imagination. You could use one to strap your beverage to the down tube when the trail says you ought to keep your hands on the bars. Or you could use another to fix your fishing gear to the top tube when rack space is maxed out. Whatever you get into on or off the bike, they're handy to have around because they're light, compact, and easy to use. Rubberized on one side to keep your stuff from slipping around, the Whip Lash's trimmable design features nylon construction and a simple hook-and-loop style closure.
- Expands up to 2x size to securely grip any shape - Weatherproof material will not deteriorate - Molded non-scratch hooks
Jandd Mono-Stay Rack Adaptor is used for bikes that have a wishbone-style configuration on the rear end.
Page 1 of 3 Next page