Filter By:
- Bar Ends (12)
- BMX (49)
- Bottom Brackets (214)
- Brakes/Levers/Pads (571)
- Cables (161)
- Cassettes/Freewheels (129)
- Chainrings (244)
- Chains (130)
- Show More Categories
- Cranksets (266)
- Derailleurs (167)
- Forks (157)
- Groups (26)
- Handlebar Grips/Tape (301)
- Handlebars (211)
- Headsets (164)
- Pedals (298)
- Saddles (279)
- Seatposts (86)
- Shift/Brake Combinations (71)
- Shifters (135)
- Shocks (25)
- Stems (136)
- Other (1721)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$2.00 - $2.99
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
$2.00
Magura olives (compression ferrule) bag/20
- Small parts used to install hydraulic hose for Magura disc brakes.
- Compatible with Campagnolo H11 brake/shift levers
$2.00
This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers.
- Covers brake hose fitting at the brake lever
$2.00
- Replacement retaining clip for the Surly Tuggnut/Snuggnut
$2.42
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$2.50
Replacement piston and seals for Hope disc brake calipers.
$2.50
Replacement piston and seals for Hope disc brake calipers.
$2.50
Use to create your desired chain length in single-speed applications. Only one half link is needed.
- Non-reusable
- Width: 9.4 mm
- Drivetrain Speeds: 1
- Color: Black
- Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
$2.50
Magura sleeve nut for mt brakes bag/10
- Small parts used to install hydraulic hose for Magura disc brakes.
$2.50
The Gyro G3 upper top plate is designed for use with the G3 detangler.
$2.54
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
$2.99
Air Spring Volume Reduction Kit
- Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer
$2.99
- For Race Face 30mm Cinch System cranks only
- Allows switching crank arms between bikes, such as a FatBike and an XC MTB
- Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle
$3.00
FSA Mega Exo Small Parts.
$3.00
FSA Standard Headset Bearings
$3.00
FSA Mega Exo Small Parts.
$3.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with KMC K710 and K710SL chains
- No tools needed
$3.00
Internal components for servicing the Reverb and Reverb Stealth mechanism.
$3.00
Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit
$3.00
Shimano E-tube Dummy Plugs
- Extra E-Tube plugs for sealing unused ports on shifters or junction boxes
- Sold each
$3.00
Shimano Front Derailleur Cable Fixing Assembly
$3.26
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$3.40
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Spacer Sleeve - 10.1mm, for 3-pawl
$3.40
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Star Ratchet Spring
$3.41
Flat head screws from Wheels Manufacturing.
$3.41
Bulk packaged, corrosion resistant stainless steel fasteners.
$3.41
Flat head screws from Wheels Manufacturing.
$3.41
Flat head screws from Wheels Manufacturing.
$3.41
Flat head screws from Wheels Manufacturing.
$3.41
Flat head screws from Wheels Manufacturing.
$3.47
Campagnolo Miscellaneous Rear Derailleur Parts, Derailleur Bolt Bushing
$3.49 - $4.49
These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head.
- Galvanized
- Pre-stretched
- Double ended
- Cable Head: Shimano/SRAM, Huret/Simplex
- Defined Color: Silver
- Diameter: 1.2mm
- Double Ended: Yes
- Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters
$3.49
Basics brake cables provide value on a budget.
- Pre-stretched
- Double ended for compatibility with SRAM/Shimano road and mountain brakes
- Color: Silver
- Diameter: 1.6mm
$3.50
Giant's Derailleur Cable And Housing Set contains all the parts you need to get your bike's shifting back on track. The galvanized cable is double-ended for use with Campagnolo or Shimano/SRAM drivetrains. The full-length housing includes all necessary aluminum ferrules.
$3.50
Giant's Brake Cable And Housing Set contains everything you need to get your braking power back. The galvanized cable is double-ended for use with road and mountain bikes and is compatible with almost all brakes. The full-length housing includes all necessary aluminum ferrules.
$3.50
Giant's Slick brake cable is pre-stretched for high responsiveness. This galvanized cable is double ended for use with road and mountain bikes and is compatible with almost all brakes.
$3.50 - $3.99
The Slic-Kable features a low friction inner wire for smooth braking.
- 65-inch length
$3.57
Complete remotes and remote components for KS dropper posts.
$3.57
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$3.68
Campagnolo small parts for bottom brackets.
$3.94
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$3.94
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$3.94
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$3.95
The Tanpan ferrule converts standard Tanpans to Tanpan inlines.
- Coverts Tanpan into Tanpan Inline
$3.99
- 1.1mm x 2100mm advanced die-drawn stainless steel cable is low friction with minimal elongation for consistently effortless shifting performance
- Recommend for use with Ciclovation™ Premium or Advanced outer casing systems
- Recommended for 10-speed drivetrains
- Compatible with all high-performance outer casing, lubricants, and end caps
$3.99
This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks.
- M12 bolt
$3.99
The Odyssey stem bolt pack features 6 - 6mm stem bolts that are M8 x 1.25mm thread.
$3.99
Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.
$3.99 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right.
- Made from Aluminum, anodized or polished finish, without logos
- 1-1/8" Diameter
- S.H.I.S. Stem Clamp Diameter: 28.6mm
$3.99
- Width: 5.8 mm
- Drivetrain Speeds: 11
- Color: Silver
- Reusable: No
$4.00
- Noodle/Boot completely seal brake cable, upgrades most linear brakes
Page 1 of 91
Next page