Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Mountain Frames

Yeti Cycles SB165 T-Series Frame
$3,999.99
Master of the gnarniverse. Bold claim. The SB165 was created to get after whatever you're getting after. The slackest sled in our lineup, with kinematics tuned for a coil-shock, the SB165 is at home outside the tape and trusted on the lines where mistakes can't happen. The SB165 already has you covered. - We wanted the SB165 to rip and have a poppy, maneuverable feel on the trail, so we built it around the 27.5" wheel platform. - At the heart of the SB165 suspension design is our patented Switch Infinity suspension system. Switch Infinity utilizes a patented translating pivot that switches direction as the bike moves through its travel. - Tuned to rip on the gnarliest trails, built tough to handle tosses and nasty tech, with kinematics specific for a coil or high-volume air shock. - The SB165 is designed to handle the steeps, so we made it low, long, and slack. - Better decoupling of the chain forces allows the suspension to work more efficiently to absorb impacts. - Chain Guide-ready out of the box with ISCG 05 mounts. - Internally tunneled cable routing allows for clean lines and a quiet, rattle-free ride. - An integrated headset allows for a lower overall stack height and cleaner carbon layup. - Our linear system built by FOX is able to achieve infinite tunability and durability, which cannot be matched by traditional link designs. - The ability to manipulate the leverage ratio without affecting the anti-squat characteristics is unique to Switch Infinity suspension. - TURQ Series bikes are made with the highest quality carbon fiber available and offer the perfect balance of stiffness and compliance.
GT Sensor Carbon Frame
$3,900.00
A modern day trail bike engineered to go fast, get loose, and have fun.
Yeti Cycles SB150 Frame
$3,900.00
"Race bred"—it’s not just a slogan printed on the SB150 top tube. We’ve been pinning on numbers and pinning the throttle since 1985. Designed for shorter fork offsets, the SB150s headtube angle is slackened and the seat tube angle is way steeper. The reach is also longer with shorter chainstays. Advantage? All of these elements increase the DH prowess and move the rider forward on the bike. But these advantages are not one-sided. The steeper seat angle, short fork offset, and forward riding position also keep the front wheel on the ground, the power to the pedals, and the steering quick and nimble when climbing. - Forward bias posture—Gives racers the room they need, and centers them on the bike. - 20mm longer travel fork—Pairs well with our forward-biased frame matching the vertical wheel travel of the rear suspension. - Slacker headtube—Lower bottom bracket and longer wheelbase. - Tested to DH standards—High-impact strength carbon lay-up tuned to go fast and tested to DH standards.
Yeti Cycles SB150 T-Series Frame
$3,799.00
"Race bred." It's not just a slogan printed on the SB150's top tube. We've been pinning on numbers and pinning the throttle since 1985. So when choices had to be made on the SB150, every single one was made in the name of unbridled speed. It represents the ultimate example of breeding a bike to beat the clock. - At the heart of the SB150 suspension design is our patented Switch Infinity suspension system. - Tuned to perform on the most grueling enduro tracks in the world. - Built Richie "F-ing" Rude tough, this frame meets Yeti DH testing standards. - The SB150 has progressive, enduro-inspired geometry. We took what we learned from our EWS team riders and made it low, slack, and long. - A patent-pending wishbone shock extender was developed to change the leverage ratio and shock clearance. - The water bottle fits comfortably inside the front triangle, where you might be used to looking for it. - Internally tunneled cable routing allows for clean lines and a quiet, rattle-free ride. - TURQ Series bikes are made with the highest quality carbon fiber available and offer the perfect balance of stiffness and compliance.
Yeti Cycles SB130 Frame
$3,600.00
The rebel yell of the middle child. Fed a steady diet of super-tech climbs. The SB130 was built to crush the biggest terrain. No trail "too" anything. Point it up or down. Enter a last-minute enduro just for the eff of it. We say no one bike can rule all. But the SB130? One bike that rules. The SB130 possesses a distinct, big mountain feel for riders constantly exposed to uncharted terrain. - Long reach—Puts riders in a balanced position perfectly centered on the bike, ready to tackle the unknown. - 150mm fork—Because our 130mm of rear suspension outperforms similarly stroked forks and pairs well with our more forward-biased position. - Front end doesn't wanter climbing and stays composed when pointed downhill—the rider position remains neutral. Low Slung, Long Drop Long stroke dropper post capability throughout the entire size range for greater agility. At home When You're Not The deeper you go, the higher you climb, the later you brake, the more comfortable SB130 becomes. Bottom line, the term "trail bike" gets used pretty liberally at Yeti. Balance, Achieved Refined for the unknown and everything in between the SB130's Switch Infinity provides a more progressive ride without affecting the anti-squat properties. Silence is TURQ Internally routed cable tubes from end to end for silent function and less translation of housing during suspension movement.
Yeti Cycles SB140 Frame
$3,600.00
Some say the SB140 never met a dirt it didn’t like. We agree in spades. What’s your pleasure? Drag a bar. Make an edit. Stay out after dark. Try it. Land it. Or just stay at it. Happy to pedal. Greedy for more. The mayor of jibtown, proudly wearing the rip crown. The SB140. Down to fun.
Norco Aurum HSP Frame
$3,599.00
The Aurum HSP was created for one single purpose: to be the fastest downhill mountain bike available. The Aurum HSP's full carbon frame is engineered for maximum strength and increased vibration damping at speed. The High Single Pivot suspension relies on precision kinematics and a chain idler wheel to ensure the suspension absorbs any obstacle between you and victory, while remaining unaffected by drivetrain forces. The adjustable reach ensures easy adjustment for rider fit or preference. Available in both 27.5 and 29" models, the Aurum HSP features Norco's Gravity Tune geometry to provide the same ride characteristics and weight balance across all three frame sizes. Starting with this world-class frame, you get to determine every detail and scrutinize every part in building your ultimate descender to power around every corner and across the finish line for your time in the Hot Seat.
Yeti Cycles SB115 Frame
$3,500.00
It's time to recalibrate your gray matter with what's happening in racing today. All it takes is "it's on!"—number plates not required. Born to naturally crush the climbs, the SB115 is evolved. Deft on the downs. Designed to race. Built to rally. A Lighter Switch Short-travel specific design of Switch Infinity, turned 90 degrees and optimized for lighter weight and efficiency. More Than Added Travel Crushing souls on the descent is more than half the fun. And a hell of a lot more than half the point. The SB115 has 115 genre-killing millimeters of travel, that work harder than ever before. 100% Anti-Squat Longer-Travel Setup, No Downside We custom tune the shock on every Yeti to compliment Switch Infinity's unique characteristics. Unlike other "short-travel" trail bikes, the SB115's suspension performs best even when set up with sag numbers (30%) akin to much longer travel bikes. We don't leave it to someone else to make every millimeter of the SB115's suspension travel count.
Yeti Cycles SB130 T-Series Frame
$3,499.00
The Rebel Yell of the middle child. Fed a steady diet of super-tech climbs, the SB130 was built to crush the biggest terrain. No trail is "too" anything. Point it up or down. Enter a last-minute enduro just for the fun of it. We like to say no one bike can rule it all. But the SB130? It's one bike that rules. - At the heart of the SB130 suspension design is our patented Switch Infinity suspension system. - The SB130 is built to tackle any type of terrain. From buffed out singletrack, to rugged EWS racecourses, it can hold its own on a huck. - The SB130 has progressive trail-inspired geometry. We took what we learned from the SB5 and our Factory team riders and incorporated it here. - A patent-pending wishbone shock extender was developed to change the leverage ratio and shock clearance. - No more gunk on your water bottle mouthpiece, as the mount is now inside the front triangle. - An integrated headset allows for a lower overall stack height and cleaner carbon layup. - Internally tunneled routing allows for clean lines, ease of maintenance, and less shifting of housing during suspension movement. - Switch Infinity utilizes a patented translating pivot that switches direction as the bike moves through its travel. - Our linear system built by FOX is able to achieve infinite tunability and durability, which cannot be matched by traditional link designs. - Decoupling of the chain forces allows the suspension to work more efficiently to absorb impacts. - The ability to manipulate the leverage ratio without affecting the anti-squat characteristics is unique to Switch Infinity suspension. - C-Series frames utilize small changes to the carbon fiber layup to offer a more aggressively priced carbon frame.
Yeti Cycles SB140 T-Series Frame
$3,499.00
Some say the SB140 never met a dirt it didn't like. We agree in spades. What's your pleasure? Drag a bar. Make an edit. Stay out after dark. Try it. Land it. Or just stay at it. Happy to pedal, greedy for more—the SB140 is down for fun. - At the heart of the SB140 suspension design is our patented Switch Infinity suspension system. - We've tuned the SB140 for maximum fun on the trail or at the park. - The SB140 is designed to help you get the wheels off the ground. - An integrated headset allows for a lower overall stack height and cleaner carbon layup. - No more gunk on your water bottle mouthpiece, as the mount is now inside the front triangle. - Internally tunneled cable routing allows for clean lines and a quiet, rattle-free ride. - Switch Infinity utilizes a patented translating pivot that switches direction as the bike moves through its travel. - Our linear system built by FOX is able to achieve infinite tunability and durability, which cannot be matched by traditional link designs. - Better decoupling of the chain forces allows the suspension to work more efficiently to absorb impacts. - The ability to manipulate the leverage ratio without affecting the anti-squat characteristics is unique to Switch Infinity suspension. - TURQ Series bikes are made with the highest quality carbon fiber available and offer the perfect balance of stiffness and compliance.
Yeti Cycles SB100 T-Series Frame
$3,399.00
Last we checked, "XC-style" racing on a mountain bike doesn't stop once you crest the climb. Crushing souls on the descent is more than half the fun. And a hell of a lot more than half the point. For racers who want to fly down as much as soar up, the SB100 is the bike we've always wanted to make. - The Switch Infinity was re-designed for 100mm of travel, it's lighter and tucks neatly behind the seat tube. Pretty rad. - The new frame designs accommodate a water bottle mount in the front triangle and allow space for longer dropper seat posts. - SB100 features genre-killing geometry, inspired by going fast downhill but balanced to provide uphill efficiency. - An integrated headset allows for a lower overall stack height and cleaner carbon layup. - Internally tunneled cable routing allows for clean lines and a quiet, rattle-free ride. - Switch Infinity utilizes a patented translating pivot that switches direction as the bike moves through its travel. - Our linear system built by FOX is able to achieve infinite tunability and durability, which cannot be matched by traditional link designs. - Better "decoupling" of the chain forces allows the suspension to work more efficiently to absorb impacts. - The ability to manipulate the leverage ratio without affecting the anti-squat characteristics is unique to Switch Infinity suspension - TURQ Series bikes are made with the highest quality carbon fiber available and offer the perfect balance of stiffness and compliance.
Intense Cycles M29 Factory Frame
$3,299.00
The M29 is the pinnacle of downhill performance. With over 25-years of development, the M29 is the newest addition to the M-series. Designed from the ground-up, developed on the World Cup circuit and proven on the podium, the 29" M29 is in a class of its own. With over 25 years of downhill racing knowledge, the M-series’ legendary legacy continues, although the M29 is not "just" a bigger brother of the M16. With specifically designed kinematics and geometry to complement the 29-inch wheels, the M29 is a fast, fierce, and fun downhill bike used in competition by our athletes, Aaron Gwin, Neko Mulally, and Jack Moir. With special features and some of the finest DH components on the market such as an optimized carbon layup, high quality wheels, internal cable routing as well as the distinguished M29 frame that was developed with the INTENSE Factory Racing team, the M29 is as striking as it is nimble when it comes to the challenges of downhill. It was prototyped in racing, in fact, one of the original M29 alloy mules finished on the podium with Jack Moir at Fort William in 2017 — an emphatic moment and absolute confirmation of the potential that would be unlocked for everyone to enjoy once the M29 project reached production status.
Giant Trance X Advanced Pro 29 Frame
$3,100.00
Extra travel, extra fun. From rowdy enduro runs to backcountry missions on steep, chunky singletrack, this new composite 29er builds on the Trance 29 platform with beefed up suspension and adjustable frame geometry. This new member of the Trance family is designed with a longer travel suspension setup for added control on the most challenging trails. The full composite frame is engineered for 135mm of rear travel and 150mm up front. The Maestro rear suspension has a two-stage adjustable Advanced Forged Composite rocker arm with a trunnion-mount shock. The flip-chip equipped rocker arm lets you adjust frame geometry for your own riding style and terrain. To fine tune the ride, you can choose a steeper or slacker headtube angle (66.2 or 65.5 degrees) and seattube angle (77.9 or 77.2 degrees), which results in either a 30mm or 40mm bottom bracket drop. And it's all built around 29-inch wheels for added stability on rugged terrain. 29er confidence and control Optimized Maestro suspension for 29-inch wheels with 135mm rear/150mm front travel to roll over rough terrain with balance and stability, giving you more momentum for technical climbs and the confidence to fly on fast, rugged singletrack descents. Added clearance for up to 2.5-inch tires. Full Composite Construction Mainframe and rear swingarm are engineered with proprietary material featuring high-performance carbon fiber and resin. Handcrafted monocoque construction makes it lightweight, stiff and compliant. Adjustable frame geometry Flip chip lets you change the headtube and seattube angles, along with the bottom bracket height, to fine-tune the handling. You can choose the low position (65.5/77.2 head/seattube angle and 40mm BB drop) for faster, open terrain or high (66.2/77.9 head/seattube angle and 30mm drop) for slower, tighter singletrack.
Intense Cycles Carbine Factory Frame
$2,999.00
The INTENSE Carbine combines up-to-date longer-reach geometry with fast-rolling 29" wheels that give confident handling and help smooth the roughest terrain. The Carbine also boasts our JS Tuned "enduro link" suspension (155mm rear, 160mm front), which has been developed with longer links, as well as a carbon upper link to optimize leverage curve, axle path, and overall performance. The Carbine Factory frameset comes with an optimized UD Carbon fiber front and rear triangle, a carbon top link, and steel hardware.
Intense Cycles M16 Frame
$2,999.00
The M16 was introduced in 2016 and was the first full-carbon downhill bike INTENSE introduced. With 27.5" wheels, the M16 remains an important race-ready model in the INTENSE line-up for those looking for a quality downhill bike with premium components and featuring the smaller wheel size. Since the initial M16 model was released, the INTENSE Factory Racing team and INTENSE engineers have worked closely together to retune the kinematics of the bike for improved agility and handling over a variety of terrain. The fixed geometry of the bike complements the bike’s new metric shock, which is longer than the predecessor for better overall stability and feeling, especially in race conditions. The geometry has been further improved and the bike has a slacker head angle, with a lower BB than the previous model. The M16 now boasts a ‘FRO’ (For Racing Only) bottom link, which works in harmony with the revised kinematics, geometry, and metric shock on the bike, offering a premium riding experience thanks to INTENSE’s high-quality engineering. We put a lot of thought into the process of improving this already-impressive downhill model, and, thanks to our accessibility to the toughest arenas in the world with some of the leading athletes on the planet, the M16 is a more complete and even more race-defined package for those looking for a 27.5" downhill bike. For 2020, the bike has a new striking look in the high-quality finish you expect from INTENSE.
Intense Cycles Primer 27.5 Factory Frame
$2,999.00
Evolved from excellence, the new INTENSE Primer is "True to the Trail", providing outstanding performance with a striking design that stands out from the crowd while delivering a confidence-inspiring trail ride every time. Tested and developed with some of the fastest athletes, the 2020 INTENSE Primer models feature a brand new full-carbon frame, utilizing the latest technology and specifically tailored for each of the 27.5" and 29" wheel-sizes with a hands-on, passionate approach. Complementing the frame is a new JS Trail Link system, which offers incredible performance on mixed terrain thanks to its ideal curve through the travel with a positive pedal platform, which ensures the INTENSE Primer is well-suited to both long climbs and chunky descents.
Intense Cycles Primer 29 Factory Frame
$2,999.00
Evolved from excellence, the new INTENSE Primer is "True to the Trail", providing outstanding performance with a striking design that stands out from the crowd while delivering a confidence-inspiring trail ride every time. Tested and developed with some of the fastest athletes, the 2020 INTENSE Primer models feature a brand new full-carbon frame, utilizing the latest technology and specifically tailored for each of the 27.5" and 29" wheel-sizes with a hands-on, passionate approach. Complementing the frame is a new JS Trail Link system, which offers incredible performance on mixed terrain thanks to its ideal curve through the travel with a positive pedal platform, which ensures the INTENSE Primer is well-suited to both long climbs and chunky descents.
Intense Cycles Primer S Factory Frame
$2,999.00
For more aggressive trail riders that are looking for a firmer and more responsive setup, the Intense Primer S delivers when it comes to all-around trail and enduro riding performance. Featuring all of the benefits of the Intense Primer, the S model boasts an innovative 279 wheel set-up, with a 29" wheel in the front for easy rolling over tough terrain paired with a 27.5" rear wheel for maximum maneuverability and traction when firing down the trails. The Primer S is light for enjoyable climbing but fast and aggressive for challenging descents. Tested and developed with some of the fastest athletes, the 2020 INTENSE Primer models feature a brand new full-carbon frame, utilizing the latest technology and specifically tailored for each wheel-size with a hands-on, passionate approach. Complementing the frame is a new JS Trail Link system, which offers incredible performance on mixed terrain thanks to its ideal curve through the travel with a positive pedal platform, which ensures the INTENSE Primer is well-suited to both long climbs and chunky descents.
Intense Cycles Sniper T Factory Frame And Shock
$2,999.00
Build up your dream endurance bike with the Sniper T Frame and Shock. Frame comes with Fox Factory Float DPS shock, upper and lower link with hardware, derailleur hanger, and seat collar, all installed. - Does not include bottom bracket or headset
Intense Cycles Sniper XC Factory Frame And Shock
$2,999.00
Build up your dream endurance race bike with the Sniper XC Frame and Shock. The Sniper XC is our lightest weight frame. - Frame comes with Fox Factory Float DPS Shock, upper and lower link with hardware, derailleur hanger, and seat collar, all installed. - Does not include bottom bracket or headset
Intense Cycles Tracer Factory Frame
$2,999.00
Since the 1st generation Tracer was introduced in 1999, the bike has been positioned as our most aggressive 27.5" enduro bike in the line —it's agile on climbs and destroys the descents. The latest iteration of the Tracer offers up a modern trail geometry with longer reach for a confidence-inspiring ride. The JS Tuned suspension "enduro link" has been developed and refined, offering longer links (including a carbon upper link) to optimize the leverage curve, axle path, and overall performance. With 165mm rear and 160mm front travel, the Tracer is an uncompromising 27.5" enduro race machine. The Tracer Factory frameset comes with an optimized layup carbon frame, a carbon top link, and steel hardware.
Norco Aurum C7 Framekit
$2,999.00
Poise and grace aren't typically used to describe a blazing DH run, but one ride aboard Norco's Aurum will have you stoked about the refined composure of this speed fiend's character. Precision carbon fiber engineering gives the Aurum's frame loads of stiffness for pinpoint control, while the RockShox Vivid RC2C Coil rear shock returns a supple, planted feel and big-hit capability when you need it most. The Aurum — Latin for “gold” — earned its name by turning the most challenging terrain features into advantages over other riders. Devour steep, gnarly sections with high-speed control and push your limits whether you’re doing park laps or racing against the clock.
Norco Aurum HSP Framekit
$2,919.00
The Aurum HSP was designed with a single purpose: to be the fastest downhill bike Norco has ever made. As an integral bike within Norco’s Race Development Program, the Aurum HSP’s proprietary design was developed and tested by Norco engineering in conjunction with the Norco Factory Racing Team. After a full year of testing and riding, including a complete UCI World Cup Downhill season, the result is a no-compromise DH race machine that delivers superior grip and control, capable of taking on the toughest tracks in the world in pursuit of gold. - Aurum HSP Full Carbon Frame: Lightweight and durable full carbon fiber frame for improved stiffness-to-weight ratio, increased vibration damping and maximum strength - Gravity Tune: Ensures optimal body position and ideal front/rear weight distribution for riders of all sizes to deliver superior handling and control at high speeds - A.R.T. Suspension: The most extreme iteration of Norco’s proven A.R.T. suspension philosophy to date. Optimized for DH race purposes delivering superior grip, support, and control on steep and rough terrain - Adjustable Front Center: Allows riders to make easy adjustments to the bike’s front center and wheelbase length for quick and easy fit and setup tuning - 27.5" or 29” wheels: offering M-XL riders a choice of wheel sizes to further fine-tune handling characteristics based on their riding style
Norco Revolver FS 100 Framekit
$2,799.00
We re-examined everything we know about XC performance and geometry, and by employing Ride Aligned technology, created the Revolver FS 100; the pinnacle of modern XC performance. The Revolver FS 120 benefits from the same stiff, lightweight chassis, but is specially-designed with a longer stroke rear shock and 120mm XC fork – creating a geometry specifically designed for larger than life rides where you don't have the time to pick the smoothest line – because there's a finish line to cross – in reality or your imagination. - Full Carbon 100mm Frame - 12x148mm - Marathon Geometry with Gravity Tune - Custom Tuned RockShox Rear Suspension - Ride Aligned RIDER BENEFITS: - POWER TO THE WIN: The Revolver FS's Ride Aligned XC design features a low, forward riding position for powerful, efficient pedaling, maximum traction, and a front end that stays on the ground when the going gets steep, so you're in control of where you go, and how fast you get there. - REDUCED FATIGUE: Shifting the rider's center of gravity for optimum weight distribution within the Revolver FS 100's wheelbase, riders are able to navigate every aspect of a race course from an optimal position. The fine-tuned Ride Aligned XC design provides increased grip and support when the rider is seated and powering through undulating terrain, which greatly-reduces fatigue by minimizing the need for weight shifts throughout the race. - STIFFER, FASTER FRAME CONSTRUCTION: The Revolver FS has been designed with a fine-tuned carbon frame to optimize pedaling efficiency. We engineered the downtube, bottom bracket and chainstay junctions to provide a 40% increase in axial rigidity, ensuring every available Watt you throw down is translated into forward motion. - OPTIMIZED SUSPENSION DESIGN: The Revolver FS is designed to excel on a wide variety of terrain. The Ride Aligned suspension kinematics maintain incredible traction both climbing and descending and provides an efficient pedaling platform without having to reach for a lockout, while tracking precisely through rough descents. By employing the Ride Aligned Bike Setup App, your suspension sets up quickly and precisely. - UNCOMPROMISED DESCENTS: In addition to the pedaling prowess of the new Revolver FS, we wanted to be sure it would charge descents – not just survive them. So, we designed the FS 100 with a 68.5 degree head angle and a 60mm stem. The 120 is a degree slacker which, when combined with the Revolver chassis' frame stiffness, 120mm dropper post and 2.35" tires, provides a level of precision and confidence on descents that will leave competitors in your wake.
Norco Revolver FS 120 Framekit
$2,799.00
We re-examined everything we know about XC performance and geometry, and by employing Ride Aligned technology, created the Revolver FS 100; the pinnacle of modern XC performance. The Revolver FS 120 benefits from the same stiff, lightweight chassis, but is specially-designed with a longer stroke rear shock and 120mm XC fork – creating a geometry specifically designed for larger than life rides where you don't have the time to pick the smoothest line – because there's a finish line to cross – in reality or your imagination. - Full Carbon 120mm Frame - 12x148mm - Marathon Geometry with Gravity Tune - Custom Tuned RockShox Rear Suspension - Ride Aligned RIDER BENEFITS: - POWER TO THE WIN: The Revolver FS's Ride Aligned XC design features a low, forward riding position for powerful, efficient pedaling, maximum traction, and a front end that stays on the ground when the going gets steep, so you're in control of where you go, and how fast you get there. - REDUCED FATIGUE: Shifting the rider's center of gravity for optimum weight distribution within the Revolver FS 100's wheelbase, riders are able to navigate every aspect of a race course from an optimal position. The fine-tuned Ride Aligned XC design provides increased grip and support when the rider is seated and powering through undulating terrain, which greatly-reduces fatigue by minimizing the need for weight shifts throughout the race. - STIFFER, FASTER FRAME CONSTRUCTION: The Revolver FS has been designed with a fine-tuned carbon frame to optimize pedaling efficiency. We engineered the downtube, bottom bracket and chainstay junctions to provide a 40% increase in axial rigidity, ensuring every available Watt you throw down is translated into forward motion. - OPTIMIZED SUSPENSION DESIGN: The Revolver FS is designed to excel on a wide variety of terrain. The Ride Aligned suspension kinematics maintain incredible traction both climbing and descending and provides an efficient pedaling platform without having to reach for a lockout, while tracking precisely through rough descents. By employing the Ride Aligned Bike Setup App, your suspension sets up quickly and precisely. - UNCOMPROMISED DESCENTS: In addition to the pedaling prowess of the new Revolver FS, we wanted to be sure it would charge descents – not just survive them. So, we designed the FS 100 with a 68.5 degree head angle and a 60mm stem. The 120 is a degree slacker which, when combined with the Revolver chassis' frame stiffness, 120mm dropper post and 2.35" tires, provides a level of precision and confidence on descents that will leave competitors in your wake.
Norco Aurum C7.1 Frame
$2,699.00
Poise and grace aren't typically used to describe a blazing DH run, but one ride aboard Norco's Aurum might have you stoked about the refined composure of this speed fiend's character. 27.5-inch wheels provide a quick and stable foundation, while precision carbon fiber engineering gives the Aurum's frame loads of stiffness for pinpoint control. Norco chose to design the Aurum around the real-world benefits of a 7-speed cassette, using 142mm rear axle spacing to optimize the chainline and increase heel clearance, while keeping tighter gear ratios for race-winning runs. The Aurum C7.1 Framekit includes a Fox Float X2 Factory rear shock and Norco 142x12 thru axle.
Norco Range Carbon Framekit
$2,639.00
The Range Carbon is the ideal Enduro bike, purpose-built to rip downhill with category-bending capability. Available in 27.5" and 29" models, the Range Carbon features modern Enduro suspension performance and geometry optimized for each wheel size. It climbs efficiently but unleashes its full potential when pointed downhill - delivering confidence-inspiring stability and control for serious speed over technical terrain. Race an Enduro, shred gnarly single-track with friends, or skip the pedaling and do a few laps of the bike park - the Range Carbon is the ultimate accomplice.
Norco Optic Carbon Framekit
$2,479.00
The Optic Carbon is a fast-pedaling trail bike that rides with just the right mix of cross-country efficiency and all-mountain capability. Ride faster, with more control, and complete confidence – the Optic gives you a whole new perspective on the trail and is the ideal bike for all-day trail adventures.
Norco Revolver 7XX1 FS Framekit
$2,299.00
The Revolver 7XX1 FS is a featherweight full-suspension cross-country carbon race weapon forged with cross-country performance for efficient power transfer, and Norco's gravity-fueled pedigree for poised bump compliance. Explosive acceleration. Magnetic trail tracking. Shoot first and annihilate your competition—this 27.5-inch Revolver is loaded with powerful potential. Framekit includes a RockShox Monarch RL rear shock, headset, rear thru axle, and seatpost clamp.
Norco Shore Framekit
$2,099.00
The spirit of Vancouver's North Shore rides with you on every Freeride and Big Mountain adventure aboard the Shore Frame Kit. The hydroformed alloy frame is designed with Norco's Ride Aligned Design System and the latest in high pivot Horst Link suspension and ride engineering to amplify your instincts on modern Freeride trails. The rear travel with a Fox Factory DHX2 Factory Coil shock for a rearward axle path that is unaffected by drivetrain forces thanks to an integrated Idler Pulley and is designed to be paired with a 180mm fork.
Page 1 of 2 Next page